Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Weldcraft 57Y03 Aftermarket TIG Back Cap medium, fits WP17/18/26 (25 Pack)
Weldcraft 57Y03 Aftermarket TIG Back Cap medium, fits WP17/18/26 (25 Pack), second view

Weldcraft 57Y03 Aftermarket TIG Back Cap medium, fits WP17/18/26 (25 Pack)

$17.31 USD
$0.69 USD each, pack of 25
  • SKU: SPM-WLD-4972-P25
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight per piece: 0.23 kg (0.51 lb)
Members earn 17 points on this order. Join today to earn 200 points off your first order.

Weldcraft 57Y03 is the medium, about 60 mm TIG back cap for WP17, WP18 and WP26 series TIG torches. This is an aftermarket part made to the same number and fit.

The back cap screws into the rear of the torch head and presses the collet closed on the tungsten. Its length sets how much tungsten you can leave in the torch: the long cap takes a full length electrode, the short one fits tight spaces.

Check the number on the packet of your old parts or in the torch parts list before ordering: it should read 57Y03. Sold in packs of 25.

Technical properties & sizes

Specifications
Pack Size 25 pieces per pack
Part number 57Y03
Part TIG Back Cap
Size medium, about 60 mm
Fits WP17, WP18 and WP26 series TIG torches
Material Heat resistant black insulating body, brass thread, O-ring seal
Supplied Back cap with O-ring
Type Aftermarket replacement
Stat. HS-Code 851590
Country of Manufacture China
Trademarks Weldcraft is a trademark of its owner. Names and part numbers are for reference only; this is an aftermarket part, not made or approved by them.
Compatibility

WP17, WP18 and WP26 series TIG torches

Air cooled and water cooled WP17/18/26 torches and their flex head versionsOther makes of torch built to the same series

Match the part number on your old part before ordering.

Part numbers
Dimensions Weldcraft Part No.(SPM Part No.)
medium, about 60 mm 57Y03(SPM-WLD-4972)

Applications & use cases

Routine replacement
Back caps crack, lose their O-ring seal or strip their thread. A leaking cap lets air into the shielding gas.

Access
Swap between long, medium and short caps to suit the joint: short caps fit tight corners, long caps take a full length tungsten.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay (5 aftermarket sellers) (pack of 25) USD 22.00 to 38.00 1 Nov 2026
Supercheap Auto (UNIMIG) (pack of 25) USD 49.00 1 Nov 2026
Spare Part Mart (pack of 25) USD 17.31 Today

Our price of USD 17.31 is 21% to 65% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Weldcraft WP17?

Yes, it was made for the Weldcraft WP17, and 2 more listed under compatible equipment. Check the old welding torch back cap is marked 57Y03 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the welding torch back cap on my Weldcraft WP17?

On the Weldcraft WP17, it depends on hours and working conditions. Follow the machine service schedule, and change it when it shows wear rather than waiting for it to fail.

What are the signs the welding torch back cap needs replacing?

Leaks, noise, loss of performance, or visible wear compared with a new part. If in doubt, measure it against the sizes in the specifications.

Should I keep the old part?

Keep it until the new one is fitted and running. It is the quickest way to compare sizes, connectors and mounting if anything looks different.

Can I return it if it does not fit?

Yes. Every order is covered by our 30 day money back guarantee. Keep it unused and in its packaging.

Is this a genuine Weldcraft 57Y03?

No. It is an aftermarket welding torch back cap made to replace the Weldcraft 57Y03. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

Related products

BACK TO TOP
Chat directly with MikeThe founder