Yanmar 119802-42000 is the aluminium engine water pump: the four hole pulley flange on a sealed bearing, the inlet pipe, the threaded ports and the thermostat housing cast into the body. It is used on Yanmar 3TNV82A and 3TNV76 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Engine Water Pump |
| Replaces |
Yanmar 119802-42000 |
| Type |
Engine coolant (water) pump |
| Engine |
Yanmar 3TNV82A, 3TNV76, 3TNV75, 3TNE82 |
| Body |
Aluminium |
| Pulley flange |
4 hole |
| Also listed as |
119802-42001 |
| Fits |
Yanmar 3TNV82A, 3TNV76, 3TNV75 and 3TNE82 engines, as in the Yanmar B25V, B27, B30V, VIO30 and VIO35, Case CX20B, CX27B and CX31 and Komatsu PC20R, PC27R and PC20-7 mini excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Yanmar machines
Yanmar 3TNV82A, 3TNV76, 3TNV75 and 3TNE82 engines, as in the Yanmar B25V, B27, B30V, VIO30 and VIO35, Case CX20B, CX27B and CX31 and Komatsu PC20R, PC27R and PC20-7 mini excavators
Check the part number on your old unit before ordering.
Part numbers
| Yanmar Part No.(SPM Part No.)
|
Fits |
|
119802-42000(SPM-HEP-5329)
|
Yanmar 3TNV82A, 3TNV76, 3TNV75 and 3TNE82 engines, as in the Yanmar B25V, B27, B30V, VIO30 and VIO35, Case CX20B, CX27B and CX31 and Komatsu PC20R, PC27R and PC20-7 mini excavators |
Use cases and applications
What it does
It circulates coolant through the block, head and radiator. A worn seal or bearing lets coolant out and the engine overheat.
Where it is used
Made for the Yanmar 3TNV82A, 3TNV76, 3TNV75, 3TNE82 engines and 11 more. The full list is in the tables above.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 62.00 |
4 Nov 2026 |
| Diselmart |
USD 94.00 |
4 Nov 2026 |
| Fab Heavy Parts |
USD 96.31 |
4 Nov 2026 |
| WDPART |
USD 128.70 |
4 Nov 2026 |
| Spare Part Mart |
USD 46.37 |
Today |
Our price of USD 46.37 is 25% to 64% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Yanmar 3TNV82A?
Yes, it was made for the Yanmar 3TNV82A, and 14 more listed under compatible equipment. Check the old water pump is marked 119802-42000 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the water pump on my Yanmar 3TNV82A?
On the Yanmar 3TNV82A, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the water pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new water pump.
Is this a genuine Yanmar 119802-42000?
No. It is an aftermarket water pump made to replace the Yanmar 119802-42000. It is not made by the original manufacturer; the number only shows what it replaces.