Zexel 104760-4053 is the VE type distributor injection pump: cast alloy body with the black fuel shutoff solenoid and lead, six capped delivery valves, the throttle and stop levers on top and a keyed drive shaft with nut, number plate reading 16700-51H07 and 104760-4053. It is used on Nissan TD42 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Zexel 104660-4053 and Nissan 16700-51H07.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Injection Pump |
| Replaces |
Zexel 104660-4053 |
| Engine |
Nissan TD42 4.2 L |
| Pump type |
VE6/10F1150RNP52 distributor pump |
| Cross references |
Zexel 104760-4053, Nissan 16700-51H07 |
| Fits |
the Nissan TD42 4.2 L six cylinder diesel engine in Nissan Patrol, Civilian bus and Safari models |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Machines
the Nissan TD42 4.2 L six cylinder diesel engine in Nissan Patrol, Civilian bus and Safari models
Check the part number on your old unit before ordering.
Part numbers
| Zexel Part No.(SPM Part No.)
|
Fits |
|
104660-4053(SPM-HEP-5129)
|
the Nissan TD42 4.2 L six cylinder diesel engine in Nissan Patrol, Civilian bus and Safari models |
|
104760-4053(SPM-HEP-5129)
|
the Nissan TD42 4.2 L six cylinder diesel engine in Nissan Patrol, Civilian bus and Safari models |
|
16700-51H07(SPM-HEP-5129)
|
the Nissan TD42 4.2 L six cylinder diesel engine in Nissan Patrol, Civilian bus and Safari models |
Applications & use cases
Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.
Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.
Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.
Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 518.22 |
2 Nov 2026 |
| SINOCMP |
USD 699.00 |
2 Nov 2026 |
| Amazon (WZCNLXLX) |
USD 815.55 |
2 Nov 2026 |
| Amazon (ZGZJYBL) |
USD 848.22 |
2 Nov 2026 |
| Spare Part Mart |
USD 399.91 |
Today |
Our price of USD 399.91 is 23% to 53% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Zexel 104760-4053?
Yes, it is a direct replacement for the Zexel 104760-4053 with the same fitting.
How often should I replace the Zexel 104760-4053?
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the fuel injection pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Why did the old pump fail?
Most failures come from contamination, cavitation from a restricted inlet, or running low on fluid. Check the inlet and the fluid before fitting the new fuel injection pump.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
Is this a genuine Zexel 104760-4053?
No. It is an aftermarket fuel injection pump made to replace the Zexel 104760-4053. It is not made by the original manufacturer; the number only shows what it replaces.