Zexel 105220-4772 is the plunger type fuel feed (lift) pump with its knurled brass hand primer on top, the cam follower on the mounting flange, two banjo bolts and four copper sealing washers. It is used on Isuzu 6BD1 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Feed Pump |
| Replaces |
Zexel 105220-4772 |
| Type |
Fuel feed pump with hand primer |
| Engine |
Isuzu 6BD1 |
| Supplied with |
2 banjo bolts, 4 sealing washers |
| Fits |
Zexel in-line injection pumps on Isuzu 6BD1 engines, as in Komatsu PC200-3 and PC200-5 and Hitachi EX200 excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Zexel machines
Zexel in-line injection pumps on Isuzu 6BD1 engines, as in Komatsu PC200-3 and PC200-5 and Hitachi EX200 excavators
Check the part number on your old unit before ordering.
Part numbers
| Zexel Part No.(SPM Part No.)
|
Fits |
|
105220-4772(SPM-HEP-5348)
|
Zexel in-line injection pumps on Isuzu 6BD1 engines, as in Komatsu PC200-3 and PC200-5 and Hitachi EX200 excavators |
Applications & use cases
Hard starting
A weak lift pump starves the injection pump. Long cranking after standing is a common sign.
Loss of power under load
If the engine pulls well when light but dies off under load, check fuel delivery and the lift pump.
Leaks
Fuel weeping from the pump body or seals means it is time to replace it.
Bleeding the system
Prime and bleed the fuel system after fitting the new pump.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 60.80 |
4 Nov 2026 |
| eHeParts |
USD 80.90 |
4 Nov 2026 |
| Holdwell |
USD 80.90 |
4 Nov 2026 |
| MyMROmarts |
USD 90.71 |
4 Nov 2026 |
| Fab Heavy Parts |
USD 105.58 |
4 Nov 2026 |
| KuduParts |
USD 110.00 |
4 Nov 2026 |
| Buy Machinery Parts |
USD 117.41 |
4 Nov 2026 |
| YEMPARTS |
USD 136.95 |
4 Nov 2026 |
| All Aftermarket Parts |
USD 141.00 |
4 Nov 2026 |
| Spare Part Mart |
USD 47.96 |
Today |
Our price of USD 47.96 is 21% to 66% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Zexel 105220-4772?
Yes, it is a direct replacement for the Zexel 105220-4772 with the same fitting.
How often should I replace the Zexel 105220-4772?
Often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the fuel pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Is this a genuine Zexel 105220-4772?
No. It is an aftermarket fuel pump made to replace the Zexel 105220-4772. It is not made by the original manufacturer; the number only shows what it replaces.