No Products in the Cart
| Differential Pressure | 50 mbar |
| Filtration Media | Borosilicate micro glass fibre 0.1 µm |
| Media type | Borosilicate micro glass fibre |
| Filtration Rating | 0.1 µm |
| Body Height | 254 mm (10") |
| Height-1 | 25 mm (31/32") |
| Total Height | 280 mm (11 1/32") |
| Maximum Working Temperature | 65°C (149°F) |
| Minimum Working temperature | 1.5°C (35°F) |
| Product Net Weight | 0.53 kg (1.17 lbs) |
| Smallest Inner Diameter | 50 mm (1 31/32") |
| Outer Diameter | 56 mm (2 7/32") |
| Largest Outer Diameter | 86 mm (3 3/8") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Alup | MA10/30 |
| Atlas Copco | 2255291728 |
| Donaldson | FF 10/3 |
| Donaldson | FF 10/30 |
| Gardner Denver | GDF10/30 |
| Grassair | GVE180 |
| HiFi Filter | SI 10105 |
| Kaeser | 10/30VH |
| Kaeser | 9.2117.0010 |
| Kaeser | 9.4540.1 |
| Mann-Filter / Mann & Hummel | LD 9010 |
| Noitech | NM 016690 |
| Omega Air | ODO 1030 FF |
| Oxfil | IF.9166 |
| Sotras | SM 9166 |
| Spare Part Mart | SPM-INF-1180 |
| Ultrafilter | FF10/30 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-Dust Environments
In workshops or factories with high airborne dust levels, the 0.1 µm borosilicate glass fibre media captures sub-micron particles, protecting downstream equipment from contamination and reducing wear.
Continuous-Duty Compressors
For compressors running 24/7, the low differential pressure of 50 mbar minimises energy loss, helping maintain system efficiency over long operating periods without frequent filter changes.
Seasonal Temperature Fluctuations
With a working range from 1.5 °C to 65 °C, this filter performs reliably in unheated plant areas during winter and in hot compressor rooms during summer, ensuring consistent filtration year-round.
Multi-Brand Fleet Maintenance
Facilities operating compressors from Alup, Atlas Copco, Gardner Denver, and Kaeser can standardise on this single filter, simplifying inventory management and reducing the risk of installing the wrong part.
Check your compressor's brand and model. This filter is a direct replacement for filters used in Alup, Atlas Copco, Gardner Denver, and Kaeser equipment. If your brand is listed, it should fit, but always verify your original filter's dimensions and thread type.
The filter uses borosilicate micro glass fibre media with a filtration rating of 0.1 µm, making it suitable for capturing fine particles and oil aerosols in compressed air systems.
The filter has a total height of 280 mm, body height 254 mm, outer diameter 86 mm, and smallest inner diameter 50 mm. Thread details are not specified; check your existing filter for thread type and size.
No, this is an aftermarket replacement built to the original dimensions and ratings. It is not a genuine or OEM part but offers a cost-effective alternative to branded filters.
Installation is similar to the original filter. Ensure the system is depressurised, remove the old filter, lubricate the seal if needed, and screw the new filter into place. Torque to manufacturer recommendations if available.
We offer worldwide shipping with tracking. Your purchase is backed by a 30-day money-back guarantee and a price-beat guarantee. If you find a lower price on an identical aftermarket filter, we will match it.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
We will also tell you when that part is due again. A couple of emails a month, and you can stop them from any one of them.
WELCOME10
Use it on your first order. Check your email and confirm the address so we can send you the reminders too.
