Sie haben keine Artikel im Warenkorb.
Aftermarket 65 mm scale tube for Qilin handheld welding guns fitted with anti-splash (M16) nozzles. The scale tube is the stainless steel tube between the gun and the copper nozzle. It screws into the front of the gun, the nozzle screws onto its end, and the engraved scale sets how far the nozzle sits from the focus point.
This is the tube for Qilin guns fitted with the anti-splash nozzles, which use an M16 thread.
Stainless steel, 65 mm long, M16 thread, 12 mm tube diameter, with the scale marked in millimetres either side of zero. Sold singly or in packs of 5.
| Length | 65 mm |
| Thread | M16 |
| Tube Diameter | 12 mm |
| Material | Stainless steel, engraved focus scale |
| Fits | Qilin handheld welding guns fitted with anti-splash (M16) nozzles |
| Pack Options | 1 or 5 tubes |
Handheld welding guns
Check the size against the part you are replacing.
| Tube | Specification | Fits | SPM Part Number(OEM no. where one exists) |
|---|---|---|---|
| Qilin anti-splash, 65 mm, M16 | 65 mm long, M16 thread, 12 mm tube | Qilin handheld (anti-splash nozzles) | SPM-LAS-2198 |
| Tube | Fits |
|---|---|
| SUP FT70, 70 mm, M16 | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T |
| SUP FT80, 80 mm, M16 | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T |
| SUP FT107, 107 mm, M16 | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T |
| SUP FT125, 125 mm, M16 | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T |
| Qilin standard, 73 mm, M10 | Qilin handheld (M10 nozzles) |
Setting focus position
Screw the nozzle along the scale to move the focus above or below the surface. Zero is the focus point; set it negative for deeper penetration on thick joints and positive for a wider, softer weld on thin sheet.
Damaged threads or scale
Spatter, knocks and over tightening wear the thread and the engraved scale. A tube that no longer holds the nozzle square gives an uneven weld.
Spare for each gun
Keeping a spare tube means a crossed thread does not stop the job. The 5 pack covers a shop with several guns.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
It fits Qilin handheld welding guns fitted with anti-splash (M16) nozzles. Check the tube on your gun: 65 mm long with a M16 thread.
No. It is an aftermarket tube made to the same length and thread.
No. The nozzles that fit your gun now fit this tube.
Yes. Shipping options and costs for your country are shown at checkout.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
