Sie haben keine Artikel im Warenkorb.
JCB 701/80591 is the two pin engine oil pressure switch that turns on the low oil pressure warning. It is used on JCB backhoe loaders. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
The same part is also sold as JCB 701/80319, JCB 701/M7305, JCB 701/80459 and JCB 701/80626.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Oil Pressure Switch |
| Replaces | JCB 701/80591 |
| Connector | 2 pin plug, black housing |
| Body | Zinc plated steel hex body with threaded port |
| Cross References | JCB 701/80319, JCB 701/M7305, JCB 701/80459, JCB 701/80626 |
| Fits | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch) |
| Condition | New, aftermarket |
| Stat. HS-Code | 853650 |
JCB machines
Check the part number on your old unit before ordering.
| JCB Part No.(SPM Part No.) | Fits |
|---|---|
| 701/80591(SPM-HEP-2657) | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch) |
| 701/80319(SPM-HEP-2657) | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch) |
| 701/M7305(SPM-HEP-2657) | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch) |
| 701/80459(SPM-HEP-2657) | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch) |
| 701/80626(SPM-HEP-2657) | JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch) |
| Brand | Part No. |
|---|---|
| JCB | 701/80591 (this page, SPM-HEP-2657) |
| JCB | 701/80319 |
| JCB | 701/M7305 |
| JCB | 701/80459 |
| JCB | 701/80626 |
All of these numbers are the same part.
Oil pressure warning light stays on
With the oil level and pressure confirmed good by a test gauge, a warning light that stays on points to a failed switch.
No warning at all
A switch that never closes leaves the engine unprotected. If the light does not come on with the key on and the engine off, test the switch and its wire.
Leaking switch
Oil weeping from the switch body or thread means the seal has gone. Replace it before the engine loses oil.
Fitting tips
Fit with a new sealing washer or thread sealant suited to oil, tighten to the engine maker's torque and check for leaks with the engine running.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (2 aftermarket sellers) | USD 18.50 to 19.00 | 5 Oct 2026 |
| Holdwell | USD 34.00 | 5 Oct 2026 |
| Spare Part Mart | USD 14.80 | Today |
Our price of USD 14.80 is 20% to 56% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of JCB 701/80591. It is not made by or affiliated with JCB; the JCB part number is used only to show what it replaces.
It fits JCB 2CX, 3CX and 4CX backhoe loaders, JCB 214, 215, 216 and 217, and 1400B to 1700B (check the number on your old switch). Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
