Sie haben keine Artikel im Warenkorb.
JLG 7013301 is the 48 volt 200 amp changeover contactor (SW181B type) that switches the drive circuit. It is used on JLG 48 volt electric lifts. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Changeover Contactor |
| Replaces | JLG 7013301 |
| Rating | 48 V coil, 200 A |
| Type | SW181B style changeover contactor |
| Fits | JLG electric scissor lifts with 48V drive systems |
| Condition | New, aftermarket |
| Stat. HS-Code | 853649 |
JLG machines
Check the part number on your old unit before ordering.
| JLG Part No.(SPM Part No.) | Fits |
|---|---|
| 7013301(SPM-ALP-2258) | JLG electric scissor lifts with 48V drive systems |
Machine will not drive
The main or direction contactor switches the drive motor current. Burned or welded contacts stop the machine driving or let it drive one way only.
Clicking but no movement
A contactor that clicks without passing current has worn contacts. Replace it before the coil or the controller is damaged.
Battery and motor service
Swap the contactor when fitting new batteries or a new drive motor so a worn part does not undo the repair.
Fleet spares
Contactors are a common failure on electric scissors. Keep one per machine type in the workshop.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay, aftermarket seller | USD 80.00 | 4 Oct 2026 |
| Aerial Equipment Parts | USD 110.00 | 4 Oct 2026 |
| Spare Part Mart | USD 64.00 | Today |
Our price of USD 64.00 is 20% to 42% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of JLG 7013301. It is not made by or affiliated with JLG; the JLG part number is used only to show what it replaces.
It fits JLG electric scissor lifts with 48V drive systems. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
