Sie haben keine Artikel im Warenkorb.
Nikko 0-25000-9061 is the 24 V starter (safety) relay in a sealed can on a two hole mounting flange, with two plug in connectors on a moulded housing. It is used on Hitachi Zaxis -3 series excavators with the Isuzu 4HK1 and 6HK1 engines. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
The same part is also sold as Hitachi 8980056311.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Starter Relay |
| Replaces | Nikko 0-25000-9061 |
| Type | Starter relay, sealed can with moulded connector housing |
| Voltage | 24 V |
| Connectors | Two plug in connectors |
| Mounting | Two hole steel flange |
| Cross References | Hitachi 8980056311 |
| Fits | Hitachi ZX200-3; Hitachi ZX210W-3; Hitachi ZX225US-3; Hitachi ZX240-3; Hitachi ZX330-3 |
| Condition | New, aftermarket |
| Stat. HS-Code | 853641 |
Hitachi machines
Check the part number on your old unit before ordering.
| Nikko Part No.(SPM Part No.) | Fits |
|---|---|
| 0-25000-9061(SPM-HEP-3141) | Hitachi ZX200-3, Hitachi ZX210W-3, Hitachi ZX225US-3, Hitachi ZX240-3, Hitachi ZX330-3 |
| Brand | Part No. |
|---|---|
| Nikko | 0-25000-9061 (this page, SPM-HEP-3141) |
| Hitachi | 8980056311 |
All of these numbers are the same part.
| Brand | Part No. |
|---|---|
| Nikko | 0-25000-9061 (this page, SPM-HEP-3141) |
| Hitachi | 8980056311 |
All of these numbers are the same part.
Function dead with good fuses
A starter, glow plug or fuel relay that has burned its contacts stops the circuit without blowing a fuse.
Clicking but no power
A relay that clicks but does not pass current has worn contacts and needs replacing.
Heat and vibration
Relays near the engine wear out from heat and vibration. Swap them during major services.
Fleet spares
Relays are cheap to keep on the van and quick to change on site.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (10 aftermarket sellers) | USD 36.99 to 73.33 | 8 Oct 2026 |
| Diselmart | USD 127.00 | 8 Oct 2026 |
| YEM Parts | USD 190.50 | 8 Oct 2026 |
| Spare Part Mart | USD 29.59 | Today |
Our price of USD 29.59 is 20% to 84% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Nikko 0-25000-9061. It is not made by or affiliated with Nikko; the Nikko part number is used only to show what it replaces.
It fits Hitachi ZX200-3; Hitachi ZX210W-3; Hitachi ZX225US-3; Hitachi ZX240-3; Hitachi ZX330-3. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
