No Products in the Cart
Bosch 0986437601 is the Bosch type unit injection pump (PF unit pump): a dark cast flange body with two mounting holes and a blue number plate, the high pressure outlet union on top, a white capped fuel port and the roller tappet spring at the base. It is used on Deutz 1013 and Volvo D7 engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Bosch 0414693001 and Deutz 04901217.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Unit Fuel Injection Pump |
| Replaces | Bosch 0414693001 |
| Engine | Deutz BFM1013, TCD2013; Volvo D7 |
| Type | Unit injection pump (PF) |
| Cross references | Bosch 0986437601, Deutz 04901217 |
| Fits | Deutz BFM1013 and TCD2013 engines and Volvo D7 engines in trucks, Renault trucks and construction machines |
| Condition | New, aftermarket |
| Stat. HS-Code | 841330 |
| Country of Manufacture | China |
Machines
Check the part number on your old unit before ordering.
| Bosch Part No.(SPM Part No.) | Fits |
|---|---|
| 0414693001(SPM-HEP-5116) | Deutz BFM1013 and TCD2013 engines and Volvo D7 engines in trucks, Renault trucks and construction machines |
| 0986437601(SPM-HEP-5116) | Deutz BFM1013 and TCD2013 engines and Volvo D7 engines in trucks, Renault trucks and construction machines |
| 04901217(SPM-HEP-5116) | Deutz BFM1013 and TCD2013 engines and Volvo D7 engines in trucks, Renault trucks and construction machines |
Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.
Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.
Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.
Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay, aftermarket seller | USD 131.91 | 2 Nov 2026 |
| Fab Heavy Parts | USD 159.60 | 2 Nov 2026 |
| SINOCMP | USD 168.00 | 2 Nov 2026 |
| Buy Machinery Parts | USD 195.59 | 2 Nov 2026 |
| Amazon (FDTONGLANG) | USD 226.83 | 2 Nov 2026 |
| Amazon (LSBESTN) | USD 235.00 | 2 Nov 2026 |
| Spare Part Mart | USD 103.18 | Today |
Our price of USD 103.18 is 22% to 56% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Deutz BFM1013, and 3 more listed under compatible equipment. Check the old fuel injection pump is marked 0986437601 or one of the cross references, because makers change parts between serial ranges.
On the Deutz BFM1013, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
No. It is an aftermarket fuel injection pump made to replace the Bosch 0986437601. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
