Bosch 0928400700 is the common rail fuel metering (inlet control) valve: the round valve body with a two hole mounting flange, the green seal ring, the plunger end and the two pin plug. It is used on common rail fuel pumps that take Bosch 0928400700. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Metering Unit |
| Replaces |
Bosch 0928400700 |
| Type |
Fuel metering unit (inlet metering valve) |
| Connector |
2 pin |
| Condition |
New, aftermarket |
| Stat. HS-Code |
848180 |
| Country of Manufacture |
China |
Part numbers
| Bosch Part No.(SPM Part No.)
|
|
0928400700(SPM-HEP-5257)
|
Applications & use cases
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid valve or its coil is the usual suspect.
Drift or creep
A valve that does not seal lets cylinders creep. A new valve restores holding.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water first.
Fleet spares
Keep the common valves for your machines in stock to cut downtime.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (4 aftermarket sellers) |
USD 26.99 to 34.99 |
3 Nov 2026 |
| WDPART |
USD 55.00 |
3 Nov 2026 |
| Spare Part Mart |
USD 21.59 |
Today |
Our price of USD 21.59 is 20% to 61% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it replace my Bosch 0928400700?
Yes, it is a direct replacement for the Bosch 0928400700 with the same fitting.
How often should I replace the Bosch 0928400700?
There is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the solenoid valve needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
How do I test a solenoid coil?
Measure the coil resistance with a multimeter and check for supply voltage at the plug with the circuit on. An open coil reads infinite.
How do I test the old part first?
Read the fault codes, then check the plug and wiring for corrosion or a broken wire. A wiring fault reads the same as a failed solenoid valve.
Is this a genuine Bosch 0928400700?
No. It is an aftermarket solenoid valve made to replace the Bosch 0928400700. It is not made by the original manufacturer; the number only shows what it replaces.