No Products in the Cart
Add lens tissue: $8.55 5% off with this part
Powder-Free Anti-Static Finger Cots for Handl...: Aftermarket shield for Bystronic laser cutting heads. Replaces Bystronic 2-08700, the copper disc that also appears in parts lists as the signboard or connector base.
The shield sits at the bottom of the head around the nozzle and takes the heat and spatter thrown back off the sheet, protecting the parts above it. A shield that is pitted, warped or covered in spatter should be changed with the nozzle.
Copper, 52 mm across and 8 mm high, with a threaded centre and a knurled edge for hand tightening. Sold singly.
| Replaces | Bystronic 2-08700 |
| Diameter | 52 mm |
| Height | 8 mm |
| Material | Copper |
| Edge | Knurled |
| Use | Bystronic Bystar, Bysprint and Byvention cutting heads |
| Stat. HS-Code | 846693 |
| Country of Manufacture | China |
Bystronic machines
Listed for these Bystronic machines by aftermarket suppliers of 2-08700. Check the number in your parts list.
| Dimensions | Bystronic Part No.(SPM Part No.) |
|---|---|
| 52 mm | 2-08700(SPM-LAS-4504) |
After a head collision
A crash bends or cracks the parts at the bottom of the head first. A spare on the shelf gets the machine cutting again within minutes.
Nozzle will not centre
A worn seat or thread lets the nozzle sit off centre, which shows as cut quality that changes with direction. Replace the worn part before re-centring.
Planned maintenance
Check the bottom of the head at every nozzle change and replace parts that are pitted, burred or loose.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Laser Consumables AU | USD 12.97 | 30 Oct 2026 |
| LaserThings AU | USD 18.72 | 30 Oct 2026 |
| MG Laser | USD 21.60 | 3 Nov 2026 |
| Quality Laser Supply | USD 21.60 | 3 Nov 2026 |
| AltParts (Alternative Parts Inc) | USD 24.00 | 3 Nov 2026 |
| Spare Part Mart | USD 11.91 | Today |
Our price of USD 11.91 is 8% to 50% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it is a direct replacement for the Bystronic 2-08700 with the same fitting. If the number is worn off, it measures 52 mm across and 8 mm high.
Laser and plasma nozzles wear in days to weeks, depending on hours of arc or beam time, material and gas. Change it on condition, not by date.
An oval or nicked orifice, spatter stuck on the tip, more dross, a wider cut or bevel on one side, and height sensing errors.
On laser heads, a cracked ceramic ring or a loose nozzle breaks the capacitive height signal. Check that both are seated and clean.
Centre the nozzle on the beam and recalibrate the height sensor. A new nozzle off centre cuts on one side only.
No. It is an aftermarket shield made to replace the Bystronic 2-08700. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
