No Products in the Cart
| Filtration Media | Inorganic Microfibers 25 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 25 µm |
| Flow direction | Out-In |
| Total Height | 250 mm (9 27/32") |
| Largest Inner Diameter | 70.5 mm (2 25/32") |
| Largest Outer Diameter | 140 mm (5 1/2") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Epe | 10400H20SLA000P |
| Epe | 10400H20XLA000M |
| Fai Filtri | CF-RN-0400-A25-NA |
| Fleetguard | ST1984 |
| Hydac | 0400RN025BN |
| Hydac | 0400RN025BN3HC |
| Hydac | 0400RN025BN4HC |
| Hydac | 0400RN025BNHC |
| Hydac | 1268865 |
| Internormen | 01NR40025VG10BP |
| Internormen | 01NR40025VG16BP |
| Internormen | 317492 |
| Mahle | PI25040RNSMX25 |
| Oxfil | HF.8446 |
| Parker Parfit | GO2615 |
| Parker Parfit | GO4706 |
| Parker Parfit | PR4511 |
| Spare Part Mart | SPM-HYD-1465 |
| Stauff | NR400E25B |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-Contamination Environments
In facilities with fine airborne particulates, such as cement plants or foundries, the 25 µm microfibre media captures dirt before it enters critical hydraulic components. This minimises abrasive wear and extends the service life of pumps and valves.
Continuous-Duty Production Lines
For 24/7 manufacturing operations, the filter’s robust element design maintains consistent oil cleanliness over long intervals. It helps avoid unplanned stops by preventing valve stiction and erratic actuator movements caused by contaminant build-up.
Planned Maintenance Schedules
When replacing filters across multiple machines, using this filter simplifies inventory. Its broad cross-reference compatibility means fewer part numbers in stock, reducing administrative overhead and the risk of ordering errors.
Hydac System Retrofits
On Hydac-branded hydraulic units, this filter drops in as an economical alternative. It maintains proper system pressure and flow while matching the original fit form, so you keep OEM-level protection without the associated cost.
Check your current filter’s brand and dimensions against this listing. This filter is a direct replacement for elements from Epe, Fai Filtri, Fleetguard-ST, Hydac, Internormen, Mahle, Oxfil, Parker Parfit, and Stauff. It suits Hydac equipment and any system calling for filters with a total height of 250 mm, largest inner diameter 70.5 mm, and largest outer diameter 140 mm. Always verify your housing dimensions before ordering.
It features a 25 µm absolute filtration rating using inorganic microfibre media. This construction removes solid particles down to 25 microns, striking a balance between effective contaminant removal and low flow restriction, which is suitable for general industrial hydraulics and return-line applications.
Total height is 250 mm, largest inner diameter 70.5 mm, and largest outer diameter 140 mm. The flow direction is from the outside to the inside (Out-In). This sizing fits standard housings that accept a 140 mm diameter canister, but always match your housing’s internal dimensions.
No, it is an aftermarket replacement built to match the specifications of the original branded filters. Spare Part Mart sources high-quality equivalents so you receive a dependable product without the brand markup. It is not sold as genuine or OEM, offering a cost-effective option for routine maintenance.
Relieve system pressure, drain or isolate the filter housing, remove the old element, and insert the new one ensuring the seal seats correctly. Note the Out-In flow direction and align the element accordingly. Prime the housing, run the system at low load to check for leaks, then resume normal operation. Always follow your equipment’s maintenance manual.
We offer worldwide shipping with tracking. All orders are backed by a 30-day money-back guarantee and our price-beat guarantee. Should the filter not perform as expected, return it within 30 days for a full refund. Contact support for any pre-sale or technical queries before purchase.
Orders typically require 1 to 5 business days for processing. During this time, we confirm product availability and prepare the shipment for consolidation.
We offer two shipping tiers. The exact cost and transit time for every option are quoted live at checkout, and you can also check them from the cart page before you buy.
Express (DHL, UPS, EMS)
For urgent needs. Transit is typically 3 to 8 business days after dispatch, depending on destination.
Economy (air cargo and special lines)
Our standard, cost-effective option. Transit is typically 5 to 15 business days after dispatch.
Shipping costs are calculated at checkout based on your location and selected shipping method.
Once your order ships, you'll receive a tracking number via email so you can monitor your delivery.
For detailed delivery information and FAQs, please visit our Delivery Information page or contact us.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.


