JLG 1600287 is the single axis platform joystick with handle, rubber boot, control board, terminal strip and wiring loom with plug. It is used on JLG H, HA, HX and SX series boom lifts and the 450A and 450AJ. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Joystick Controller |
| Replaces |
JLG 1600287 |
| Type |
Single axis joystick controller with control board |
| Connection |
Wiring loom with multi pin plug, screw terminal strip |
| JLG Numbers |
1600287 |
| Fits |
450A; 450AJ; 100SX; 110SX; 120SXJ; 40H; 60HA; 70H; 80HX; 86HX; 150HAX |
| Condition |
New, aftermarket |
| Stat. HS-Code |
853710 |
Compatibility
machines
450A450AJ100SX110SX120SXJ40H60HA70H80HX86HX150HAX
Check the part number on your old unit before ordering.
Part numbers
| JLG Part No.(SPM Part No.)
|
Fits |
|
1600287(SPM-ALP-3347)
|
450A, 450AJ, 100SX, 110SX, 120SXJ, 40H, 60HA, 70H, 80HX, 86HX, 150HAX |
Applications & use cases
Machine will not drive or lift
A worn joystick is a common cause when the platform controls stop responding or only work in one direction. Check the fault code on the control box first, then the joystick.
Jerky or uneven movement
Worn potentiometers and enable switches give jumpy proportional control. A new joystick restores smooth starts and stops.
Broken handle or boot
A cracked handle or torn boot lets dirt and water into the joystick and it fails soon after. Replace it before it strands a machine.
Rental fleet spares
Keeping a spare joystick for each machine type means a lift goes back on hire the same day instead of waiting for parts.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (11 aftermarket sellers) |
USD 109.66 to 185.00 |
25 Oct 2026 |
| Work Platform Parts |
USD 195.00 |
1 Nov 2026 |
| Aerial Equipment Parts |
USD 250.00 |
18 Oct 2026 |
| The Modern Shop |
USD 407.87 |
1 Nov 2026 |
| DuraForce |
USD 440.99 |
1 Nov 2026 |
| Spare Part Mart |
USD 87.73 |
Today |
Our price of USD 87.73 is 20% to 80% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Is this a genuine JLG part?
No. It is an aftermarket part made to fit in place of JLG 1600287. It is not made by or affiliated with JLG; the JLG part number is used only to show what it replaces.
Will it fit my machine?
It fits 450A; 450AJ; 100SX; 110SX; 120SXJ; 40H; 60HA; 70H; 80HX; 86HX; 150HAX. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
Does it fit without changes?
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.