No Products in the Cart
| Filtration Media | Inorganic Microfibers 7 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 7 µm |
| Flow direction | Out-In |
| Total Height | 480 mm (18 7/8") |
| Largest Inner Diameter | 73.4 mm (2 7/8") |
| Smallest Inner Diameter | 70.3 mm (2 25/32") |
| Largest Outer Diameter | 129 mm (5 3/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | CF-8-690-A06-NA |
| Internormen | 306779 |
| Mahle | 852690SMX6 |
| Oxfil | HF.8003 |
| Spare Part Mart | SPM-HYD-1561 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Continuous Duty in Manufacturing Plants
When hydraulic power units run 24/7, contamination from pump wear and external ingression builds rapidly. The 7 µm microfibre media captures sludge and silt that would otherwise score spool valves and reduce system response, helping maintenance teams extend oil change intervals and avoid unscheduled downtime.
Mobile Machinery in Dusty Environments
On construction or agricultural sites, airborne dust constantly challenges breather caps and cylinder wipers. This filter, with its deep-pleated inorganic media, acts as the last line of defence, trapping particles that bypass inlet strainers and safeguarding expensive hydrostatic drives and final drives.
Consolidating Inventory Across Mixed Fleets
Workshops maintaining equipment from different OEMs often juggle multiple filter part numbers. By cross-referencing Fai Filtri, Internormen, Mahle and Oxfil designs into one this filter element, you reduce shelf stock, simplify ordering, and still ensure every machine gets the correct filtration performance.
Scheduled Maintenance Turnarounds
During planned shutdowns, speed and correctness matter. This filter arrives with worldwide tracking and fits housings with the exact diameters and height needed for a drop-in swap, so crews can complete filter changes quickly and return equipment to service without rework.
This filter directly replaces elements originally supplied under Fai Filtri, Internormen, Mahle or Oxfil brands. Check your current element’s part number against the cross-reference list on our site, and confirm the key dimensions match your housing: total height 480 mm, largest inner diameter 73.4 mm, smallest inner diameter 70.3 mm, and largest outer diameter 129 mm. If you need help, our support team can verify compatibility before you order.
The element uses inorganic microfibre media with an absolute filtration rating of 7 µm. Inorganic microfibres offer high dirt-holding capacity and strong resistance to water and chemical degradation, maintaining consistent particle removal over the full service interval in demanding hydraulic oils.
Overall height is 480 mm. The element has a largest outer diameter of 129 mm, and two inner diameters: 73.4 mm at the wider end and 70.3 mm at the smaller end. Thread specifications are not published here, as most hydraulic filter housings use a centre post and seal arrangement. Always compare these measurements with your current element before installation.
No, this filter is an aftermarket replacement element manufactured to match the dimensional and performance specifications of the branded equivalents. It is not produced by or affiliated with those OEMs. You receive equivalent filtration quality and fitment at a more cost-effective price point.
Always depressurise the hydraulic system before opening the filter housing. Remove the old element, clean the housing bore, and inspect seals for nicks or wear. Lubricate the new element’s o-ring with clean system oil, then slide this filter into place, ensuring it seats squarely on the centre post or bottom plate. Tighten the housing cover to the manufacturer’s torque specification, then bleed the system and check for leaks.
Every order ships worldwide with tracking. If the filter does not fit or perform as expected, return it within 30 days for a full refund under our money-back guarantee. We also offer a price-beat guarantee, so if you find an identical aftermarket element advertised at a lower delivered price, we will beat it. Contact us before purchase to arrange the price match.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
