No Products in the Cart
| Body Height | 244 mm (9 19/32") |
| Total Height | 244 mm (9 19/32") |
| Product Net Weight | 0.26 kg (0.57 lbs) |
| Largest Inner Diameter | 39 mm (1 17/32") |
| Smallest Inner Diameter | 5 mm (3/16") |
| Outer Diameter | 83 mm (3 9/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Atlas Copco | 1622314200 |
| Atlas Copco | 1622314280 |
| Atlas Copco | 1625840000 |
| Fai Filtri | CF-001-7-0862 |
| HiFi Filter | SH 62195 |
| Mann-Filter / Mann & Hummel | HU 832/1 |
| Noitech | NO 100100 |
| Oxfil | HF.9044 |
| Sotras | SH 8273 |
| Sotras | SH 8330 |
| Spare Part Mart | SPM-HYD-1007 |
| T.G. Filter | TGO 600 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Continuous-Duty Compressor Operation
In facilities where compressors run 24/7, this filter ensures consistent hydraulic fluid filtration, reducing wear on pumps and valves. Its robust construction handles the demands of non-stop operation, helping to extend service intervals.
Harsh Dusty Environments
For compressors installed in dusty workshops or construction sites, this filter captures particulates that could otherwise contaminate the hydraulic system. This protects sensitive components and maintains performance in challenging conditions.
Fleet Maintenance Consolidation
If you maintain multiple Atlas Copco GA compressors from different production years, this single filter cross-references to many models. That simplifies inventory management and reduces the risk of stocking the wrong part.
Preventative Maintenance Schedules
In planned maintenance programs, replacing the hydraulic filter at set intervals is critical. This filter is a reliable, budget-friendly choice that fits standard replacement cycles without requiring special tools.
Check your compressor's serial number against the list of verified machines. For Atlas Copco models like GA 37 PLUS from s/n API 507438 or GA 30 PLUS from s/n API 591000, this filter is a direct fit. If your model is not listed, compare your old filter's dimensions (outer diameter 83 mm, body height 244 mm, largest inner diameter 39 mm) with this filter.
This filter is a hydraulic filter element. While the exact micron rating is not specified in the verified data, it is designed to meet the filtration requirements of Atlas Copco GA series compressors. For precise media details, consult your compressor manual or contact us.
The filter has an outer diameter of 83 mm, a body height of 244 mm, and two inner diameters: largest 39 mm and smallest 5 mm. Thread specifics are not provided, but these dimensions match the OEM filter for the listed Atlas Copco models. Ensure your housing accommodates these measurements.
This filter is an aftermarket replacement, not a genuine OEM part. It is built to match the specifications of filters from brands like Atlas Copco, Mann-Filter, and others. It offers a cost-effective alternative while maintaining compatibility and performance.
Installation is similar to the original filter. Turn off the compressor, relieve system pressure, and remove the old filter. Clean the mounting surface, lubricate the new filter's gasket with clean oil, and hand-tighten it into place. Do not use tools to overtighten. Refer to your compressor's manual for detailed steps.
We offer worldwide shipping with tracking. Your purchase is backed by a 30-day money-back guarantee and a price-beat guarantee. If you find a lower price elsewhere, we will match it.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
By entering your email you agree to our terms and conditions.
WELCOME10
Tap below and it is applied to your basket automatically, so you will not need to type it at checkout. Check your email and confirm the address and we will tell you when that part is due again.
Apply it and keep shopping
