No Products in the Cart
Miller 192050 is the retaining cup for the Miller ICE-40C, ICE-40T, ICE-50C and ICE-55C air plasma torches, used on the Spectrum 625, 625 X-TREME, 701 and 2050 plasma cutters. This is an aftermarket part made to the same number and fit.
The retaining cup screws onto the torch head and clamps the swirl ring, electrode and tip in place. It has a heat resistant composite body with a threaded insert.
Check the number on your old part or in the torch manual before ordering: it should read 192050.
| Part number | 192050 |
| Part | Plasma retaining cup |
| Current | all currents |
| Fits | Miller ICE-40C, ICE-40T, ICE-50C and ICE-55C hand and machine torches |
| Material | Heat resistant composite with threaded insert |
| Weight | About 40 g each |
| Type | Aftermarket replacement |
| Stat. HS-Code | 851590 |
| Country of Manufacture | China |
| Trademarks | Miller, ICE and Spectrum are trademarks of their owners. Names and part numbers are for reference only; this is an aftermarket part, not made or approved by them. |
Miller ICE plasma torches
Match the part number on your old part before ordering. The XT30, XT40 and XT60 torches use different parts.
| Dimensions | Miller Part No.(SPM Part No.) |
|---|---|
| retaining cup | 192050(SPM-PLA-5010) |
Holding the stack together
The retaining cap clamps the nozzle, swirl ring and electrode in the torch head. Replace it if the insulation is cracked, the thread is damaged or the cap no longer seats tightly.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (5 aftermarket sellers) | USD 21.47 to 23.36 | 1 Nov 2026 |
| FridayParts | USD 34.64 | 1 Nov 2026 |
| Weld-Ready (Generic) | USD 41.62 | 1 Nov 2026 |
| Arc-Zone (Profax) | USD 48.71 | 5 Nov 2026 |
| Spare Part Mart | USD 17.05 | Today |
Our price of USD 17.05 is 21% to 65% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Miller ICE-40C, and 3 more listed under compatible equipment. Check the old plasma retaining cap is marked 192050 or one of the cross references, because makers change parts between serial ranges.
On the Miller ICE-40C, it depends on hours and working conditions. Follow the machine service schedule, and change it when it shows wear rather than waiting for it to fail.
Leaks, noise, loss of performance, or visible wear compared with a new part. If in doubt, measure it against the sizes in the specifications.
Yes. Every order is covered by our 30 day money back guarantee. Keep it unused and in its packaging.
Keep it until the new one is fitted and running. It is the quickest way to compare sizes, connectors and mounting if anything looks different.
No. It is an aftermarket plasma retaining cap made to replace the Miller 192050. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
