No Products in the Cart
| Filtration Media | Inorganic Microfibers 5 µm |
| Media type | Inorganic Microfibers |
| Filtration Rating | 5 µm |
| Flow direction | Out-In |
| Total Height | 188 mm (7 13/32") |
| Largest Inner Diameter | 111 mm (4 3/8") |
| Largest Outer Diameter | 160 mm (6 5/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | CF-8-087-A03-NA |
| Internormen | 048520873VG16BO |
| Mahle | 852087SMX3 |
| Oxfil | HF.7742 |
| Parker Parfit | GO2948 |
| Spare Part Mart | SPM-HYD-1327 |
| Stauff | LL100E03B |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-Contamination Environments
Construction and mining equipment often operate in dusty, abrasive conditions where rapid oil contamination is a constant threat. Installing this filter ensures effective removal of hard particles, extending component life and reducing unplanned downtime.
Continuous-Duty Hydraulic Systems
In manufacturing plants where hydraulic power units run around the clock, the 5 µm microfibre media provides consistent filtration efficiency over long service intervals, helping maintain cleanliness codes without frequent element changes.
Fleet Maintenance Consolidation
For workshops servicing a mixed fleet using different filter brands, this element consolidates inventory by replacing six branded part numbers, simplifying procurement and storage while delivering uniform filtration performance.
Preventative Maintenance Programs
Integrating this filter into scheduled oil changes and filter swaps supports a proactive approach to contamination control, minimising the risk of valve sticking and pump cavitation from accumulated silt.
This element is a verified direct replacement for select filter cartridges from Fai Filtri, Internormen, Mahle, Oxfil, Parker Parfit, and Stauff. If your existing element carries part numbers from these brands within the same dimensional and micron rating range, this filter will fit correctly.
The element uses inorganic microfibre media with a nominal rating of 5 µm. This media type is chosen for its dirt-holding capacity and ability to capture fine particles without excessive pressure drop, maintaining oil flow and system efficiency.
The total height is 188 mm, the largest outer diameter is 160 mm, and the inner diameter at the open end is 111 mm. Oil flows from outside to inside (Out-In), meaning dirty oil enters through the outer jacket and clean oil exits through the centre core. Please verify your housing dimensions before ordering.
This filter is an aftermarket element engineered to match the form, fit, and function of the original branded parts. It is not manufactured by the original equipment manufacturers but is built to meet the same specifications, offering a cost-effective alternative without compromising compatibility.
Replacement follows standard hydraulic filter change-out procedures. Depressurise the system, remove the housing bowl, discard the spent element, clean the housing, and insert the new filter. No special tools are required. Always apply a thin film of clean hydraulic oil to the seal before tightening.
We provide worldwide shipping with tracking on every order. We also offer a 30-day money-back guarantee and a price-beat guarantee, so you can purchase with confidence knowing you are getting the best value.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
By entering your email you agree to our terms and conditions.
WELCOME10
Tap below and it is applied to your basket automatically, so you will not need to type it at checkout. Check your email and confirm the address and we will tell you when that part is due again.
Apply it and keep shopping
