Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Pneumatech P-60-15 Aftermarket Line Filter Element, Particulate 3 Micron, photo 1
  • SKU: SPM-INF-2955
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time

Pneumatech P-60-15 Aftermarket Line Filter Element, Particulate 3 Micron

$28.00 USD
Pneumatech P-60-15, direct aftermarket replacement. It is the grade P (particulate interceptor, 3 micron) element in size 60-15. It measures 2 in (51 mm) outside diameter and 6 in (152 mm) long.

This is the particulate interceptor that catches rust, pipe scale and dirt down to 3 micron, usually fitted ahead of a grade C coalescer so the finer element lasts longer. The C and P elements of the same size share one housing, so check the letter on the old element before ordering. Every element is checked against the part number before it ships, and every order is covered by our 30 day money back guarantee, worldwide delivery and price beat guarantee. TECHNICAL PROPERTIES & CROSS REFERENCES
Specifications
Part Type Compressed air filter element
Replaces Pneumatech P-60-15
Element Size 60-15
Grade grade P (particulate interceptor, 3 micron)
Filtration Solid particles down to 3 micron, high dirt holding capacity
Outside Diameter 51 mm (2 in)
Overall Length 152 mm (6 in)
Stat. HS-Code 842139
Cross References
Brand Code
Pneumatech P-60-15
Spare Part Mart SPM-INF-2955

Price Beat Guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eIndustrial Solutions USD 35.00 6 Oct 2026
Filter Element Store USD 35.16 6 Oct 2026
eBay (4 aftermarket sellers) USD 38.00 to 71.01 6 Oct 2026
Moisture Boss USD 99.90 6 Oct 2026
Spare Part Mart USD 28.00 Today

Our price of USD 28.00 is 20% to 72% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Use Cases & Applications

Annual element change
Change the element at least once a year (about 8,000 running hours), or sooner if the differential pressure gauge on the filter shows the element is loaded.

Protecting the coalescer
The P element takes the bulk of the pipe scale, rust and dirt out of the air, so the 0.01 micron C element after it lasts its full life.

Workshop and plant air
Line filters sit after the compressor, receiver or dryer to keep water, oil and dirt out of air tools, valves and cylinders.

Frequently Asked Questions

Is this a genuine Pneumatech P-60-15?

No. It is an aftermarket compressed air filter element made to replace the Pneumatech P-60-15. It is not made by or affiliated with Pneumatech, and the part number is used only to show what it replaces.

Will it fit my filter?

It replaces the element numbered P-60-15. Check the number printed on the old element, or measure it: this one is 2 in (51 mm) outside diameter and 6 in (152 mm) long. The first letter is the grade (C coalescing, P particulate) and the numbers are the size.

When should I change the element?

Change the element at least once a year (about 8,000 running hours), or sooner if the differential pressure gauge on the filter shows the element is loaded.

What is the difference between the C and P elements?

The P element is a 3 micron particulate interceptor that holds a lot of dirt. The C element is a 0.01 micron coalescer that removes oil and water aerosols. Where both are fitted, the P element goes first so the C element is not blocked by solid dirt.

Should I change anything else at the same time?

Change the other elements in the same line at the same service, fit new O-rings if the old ones are flattened or cracked, and check that the drain on the filter bowl works.

Do you ship to my country?

Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

RELATED PRODUCTS

BACK TO TOP