No Products in the Cart
| Filtration Media | Impregnated Paper 25 µm |
| Media type | Impregnated Paper |
| Filtration Rating | 25 µm |
| Flow direction | In-Out |
| Total Height | 482 mm (19") |
| Thread | M M6 Female Top |
| Type | M |
| Thread Size | M6 |
| Orientation | Female |
| Position | Top |
| Largest Inner Diameter | 61.5 mm (2 13/32") |
| Largest Outer Diameter | 100.5 mm (3 31/32") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Fai Filtri | CF-8-754-P25-NA |
| Fleetguard | ST1339 |
| Mahle | 852754MIC25 |
| Oxfil | HF.8030 |
| Regeltechnik | P300025S |
| Spare Part Mart | SPM-HYD-1576 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-Contamination Environments
In construction or mining equipment where dust and metallic particles are common, the 25-micron media traps abrasive debris before it reaches pumps and valves. This cuts wear on expensive components and reduces unplanned downtime.
Preventive Maintenance Scheduling
Fleet workshops can replace filters at set intervals without overpaying for branded parts. The consistent filtration quality helps maintain oil cleanliness targets across service cycles, keeping machines in the field longer.
Inventory Consolidation
With cross-references spanning five major filter brands, a single part number replaces multiple stock items. This simplifies warehouse management and reduces the risk of ordering incorrect filters for mixed fleets.
Mobile Hydraulic Systems
For tractors, loaders or other mobile machinery operating under variable loads, reliable contaminant removal is critical. The robust impregnated paper media holds up to pressure fluctuations while protecting hydraulic motors and cylinders.
Check your current filter’s part number against the cross-reference list for Fai Filtri, Fleetguard-ST, Mahle, Oxfil and Regeltechnik. Verify the dimensions: 482 mm height, 100.5 mm outer diameter, 61.5 mm inner diameter and an M6 female top thread. If those match, this filter will fit your housing.
The filter uses 25-micron impregnated paper media. Impregnated paper offers a good balance of particle capture and oil flow, removing contaminants that can score hydraulic components and cause system inefficiency.
The thread is M6 female, located at the top. Overall height is 482 mm. The largest outer diameter is 100.5 mm and the largest inner diameter is 61.5 mm. Always measure your existing filter housing to confirm these dimensions before ordering.
No, this filter is an aftermarket replacement. It is built to match the specifications of the cross-referenced manufacturers but is not a genuine part. You get comparable filtration performance at a more economical price point.
Remove the old element, clean the housing sealing surface, and lightly lubricate the new O-ring with clean hydraulic oil. Spin the filter on until the gasket contacts the base, then tighten by hand an additional half turn. Do not use a wrench to avoid over-tightening. Start the system and check for leaks around the seal.
We offer worldwide shipping with tracking on every order. All Spare Part Mart aftermarket filters are covered by a 30-day money-back guarantee. If you find a lower price elsewhere, our price-beat guarantee ensures you get the best deal.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
We will also tell you when that part is due again. A couple of emails a month, and you can stop them from any one of them.
WELCOME10
Use it on your first order. Check your email and confirm the address so we can send you the reminders too.
