No Products in the Cart
| Filtration Media | Wire Mesh 60 µm |
| Media type | Wire Mesh |
| Filtration Rating | 60 µm |
| Total Height | 200 mm (7 7/8") |
| Thread | GAS 1.1/2 inch Female Bottom |
| Type | GAS |
| Thread Size | 1.1/2 inch |
| Orientation | Female |
| Position | Bottom |
| Outer Diameter | 86 mm (3 3/8") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Epe | S115G60S00000 |
| Fai Filtri | SUE-115-M60-SG |
| Filtrec | FS133B7T60 |
| HiFi Filter | SH 77037 |
| Hydac | 0100S075W |
| Hydac | 01251195 |
| Hydac | 01261908 |
| Hydac | 02056278 |
| Hydac | SFE100G7510 |
| Ikron | HF41230181ASMI060GHA01 |
| Internormen | 01ASF16580G |
| Omt | SF86B112GR60 |
| Oxfil | OF.9111 |
| Spare Part Mart | SPM-OIL-1475 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Continuous-duty hydraulic systems
In machinery that runs around the clock, such as injection moulding presses or large compressors, this filter maintains oil cleanliness hour after hour. The wire mesh construction resists deformation under sustained pressure, helping to protect pumps and valves from wear and unplanned downtime.
Dusty or dirty operating environments
Workshops with airborne particles from grinding, sawing, or heavy vehicle traffic can overwhelm hydraulic systems. The 60-micron rating traps abrasive dust before it circulates through sensitive components, reducing the frequency of unexpected seal failures and extending the life of hydraulic rams.
Fleet and multi-brand consolidation
Because this filter cross-references filters from Epe, Fai Filtri, Filtrec, HiFi Filter, Hydac, Ikron, Internormen, Omt and Oxfil, a single part number can replace multiple branded filters across different machines. This streamlines inventory management and cuts down on shelf space and ordering complexity.
Preventive maintenance scheduling
Integrating this aftermarket filter into routine oil changes ensures consistent filtration performance while keeping maintenance budgets predictable. Service intervals remain aligned with equipment recommendations, and the cost savings can be redirected towards other upkeep tasks.
Compare your existing filter’s thread type (GAS 1.1/2 inch female), outer diameter (86 mm), and total height (200 mm) with this filter’s specifications. If these measurements match and your equipment uses filters from brands such as Hydac, Epe, Fai Filtri, or any of the other cross-referenced manufacturers, this aftermarket filter will install correctly.
The filter uses a wire mesh media with a nominal rating of 60 microns. This robust construction effectively captures particles that could damage hydraulic components while permitting oil flow rates needed by most industrial systems.
It features a female GAS 1.1/2 inch thread at its base. The total filter height is 200 mm and the outer diameter measures 86 mm. These dimensions provide a direct drop-in fit for housings designed around the corresponding branded filters.
No, this is an aftermarket replacement built to the original dimensions and ratings. It delivers the same filtration functionality as the branded equivalent at a lower cost, offering a practical alternative for routine maintenance without compromising on performance.
First, remove the existing filter and clean the mounting surface. Apply a light film of clean oil to the new filter’s sealing gasket, then spin it onto the housing thread by hand until snug. Tighten only as per the equipment manufacturer’s recommended torque and check for leaks during initial operation.
We offer worldwide shipping with tracking on every order. Your purchase is covered by a 30-day money-back guarantee and our price-beat guarantee. Should you find a lower price or be unsatisfied with the product for any reason, we will make it right.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
By entering your email you agree to our terms and conditions.
WELCOME10
Tap below and it is applied to your basket automatically, so you will not need to type it at checkout. Check your email and confirm the address and we will tell you when that part is due again.
Apply it and keep shopping
