No Products in the Cart
Aftermarket 125 mm scale tube for SUP (Chaoqiang Weiye) SUP20S, SUP20T, SUP21T, SUP23S and SUP23T handheld welding guns (M16 nozzles). The scale tube is the stainless steel tube between the gun and the copper nozzle. It screws into the front of the gun, the nozzle screws onto its end, and the engraved scale sets how far the nozzle sits from the focus point.
FT125 is the longest SUP tube, for the deepest reach into boxes, channels and inside corners, with the gun furthest from the heat.
Stainless steel, 125 mm long, M16 thread, 12 mm tube diameter, with the scale marked in millimetres either side of zero. Sold singly or in packs of 5.
| Length | 125 mm |
| Thread | M16 |
| Tube Diameter | 12 mm |
| Material | Stainless steel, engraved focus scale |
| SUP Code | FT125 |
| Fits | SUP (Chaoqiang Weiye) SUP20S, SUP20T, SUP21T, SUP23S and SUP23T handheld welding guns (M16 nozzles) |
| Pack Options | 1 or 5 tubes |
Handheld welding guns
Check the size against the part you are replacing.
| Tube | Specification | Fits | SPM Part Number(OEM no. where one exists) |
|---|---|---|---|
| SUP FT125, 125 mm, M16 | 125 mm long, M16 thread, 12 mm tube | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T | FT125(SPM-LAS-2197) |
| Tube | Fits |
|---|---|
| SUP FT70, 70 mm, M16 | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T |
| SUP FT80, 80 mm, M16 | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T |
| SUP FT107, 107 mm, M16 | SUP20S, SUP20T, SUP21T, SUP23S, SUP23T |
| Qilin anti-splash, 65 mm, M16 | Qilin handheld (anti-splash nozzles) |
| Qilin standard, 73 mm, M10 | Qilin handheld (M10 nozzles) |
Setting focus position
Screw the nozzle along the scale to move the focus above or below the surface. Zero is the focus point; set it negative for deeper penetration on thick joints and positive for a wider, softer weld on thin sheet.
Reaching into corners
A longer tube (FT107 or FT125 on SUP guns) gets the nozzle into boxes, channels and inside corners that the standard FT70 cannot reach.
Damaged threads or scale
Spatter, knocks and over tightening wear the thread and the engraved scale. A tube that no longer holds the nozzle square gives an uneven weld.
Spare for each gun
Keeping a spare tube means a crossed thread does not stop the job. The 5 pack covers a shop with several guns.
Found this part cheaper elsewhere? Send us the listing and we will beat it under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
It fits SUP (Chaoqiang Weiye) SUP20S, SUP20T, SUP21T, SUP23S and SUP23T handheld welding guns (M16 nozzles). Check the tube on your gun: 125 mm long with a M16 thread.
No. It is an aftermarket tube made to the same length and thread. FT125 is the SUP length code, given so you can match your tube.
No. The nozzles that fit your gun now fit this tube.
Yes. Shipping options and costs for your country are shown at checkout.
