No Products in the Cart
Thermal Dynamics 9-8245 is the 40A shield cap for the SL60 and SL100 1Torch plasma torches, used on Thermal Dynamics Cutmaster and Victor air plasma cutters (40 A). This is an aftermarket part made to the same number and fit.
The shield cap screws onto the front of the shield cup for standoff and machine cutting at 40 A. Its small front orifice guides the shield gas around the arc and keeps spatter off the tip.
Check the number on your old part or in the torch manual before ordering: it should read 9-8245. Sold in packs of 5 or 10.
| Part number | 9-8245 |
| Part | Plasma shield cap |
| Current | 40 A |
| Fits | SL60 and SL100 1Torch hand and machine torches (Thermal Dynamics) |
| Material | Copper |
| Weight | About 10.0 g each |
| Type | Aftermarket replacement |
| Pack Options | 5 pack, 10 pack |
| Stat. HS-Code | 851590 |
| Country of Manufacture | China |
| Trademarks | Thermal Dynamics, 1Torch, Cutmaster, SL60 and SL100 are trademarks of their owners. Names and part numbers are for reference only; this is an aftermarket part, not made or approved by them. |
Thermal Dynamics SL60 / SL100 1Torch
Match the part number on your old part before ordering.
| Pack | Dimensions | Thermal Dynamics Part No.(SPM Part No.) |
|---|---|---|
| Thermal Dynamics 9-8245 | 40A | 9-8245(SPM-PLA-5004) |
Drag cutting
With a drag shield cap you can rest the torch on the plate and follow a line or template by hand. Replace the cap when its face is worn, burned or out of round.
Holding the stack together
The shield cup holds the start cartridge, tip and electrode in the torch head. Replace it when it is cracked or chipped or the thread is worn; a loose cup stops the torch firing, because the torch senses when the cup is not seated.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (5 aftermarket sellers) (pack of 5) | USD 11.49 to 13.16 | 1 Nov 2026 |
| Spare Part Mart (pack of 5) | USD 9.12 | Today |
Our price of USD 9.12 is 21% to 31% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Thermal Dynamics SL60, and 1 more listed under compatible equipment. Check the old plasma shield is marked 9-8245 or one of the cross references, because makers change parts between serial ranges.
On the Thermal Dynamics SL60, laser and plasma nozzles wear in days to weeks, depending on hours of arc or beam time, material and gas. Change it on condition, not by date.
An oval or nicked orifice, spatter stuck on the tip, more dross, a wider cut or bevel on one side, and height sensing errors.
Look at the orifice: if it is oval, nicked or has spatter stuck to it, the cut quality falls. Change it before it damages the parts behind it.
Centre the nozzle on the beam and recalibrate the height sensor. A new nozzle off centre cuts on one side only.
No. It is an aftermarket plasma shield made to replace the Thermal Dynamics 9-8245. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
