Volvo 14560160 is the hydraulic low pressure sensor: a stainless body with a threaded port and O ring and a brown three pin plug. It is used on Volvo EC140C and EC160C excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
The same part is also sold as Volvo 17252661.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Low Pressure Sensor |
| Replaces |
Volvo 17252661 |
| Cross references |
Volvo 14560160 |
| Fits |
Volvo EC140C, EC140D, EC160C, EC160D, EC180C and EC180D excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
903289 |
| Country of Manufacture |
China |
Compatibility
Volvo machines
Volvo EC140C, EC140D, EC160C, EC160D, EC180C and EC180D excavators
Check the part number on your old unit before ordering.
Part numbers
| Volvo Part No.(SPM Part No.)
|
Fits |
|
17252661(SPM-HEP-4564)
|
Volvo EC140C, EC140D, EC160C, EC160D, EC180C and EC180D excavators |
|
14560160(SPM-HEP-4564)
|
Volvo EC140C, EC140D, EC160C, EC160D, EC180C and EC180D excavators |
Applications & use cases
Wrong or missing reading
A failed sensor gives a dead or false gauge reading or a warning light.
Fault codes
Check the wiring and plug first; if the sensor itself reads out of range, replace it.
Corrosion
Connectors on machines take water and dirt. A corroded sensor is cheaper to replace than to chase.
Fleet spares
Common sensors are worth keeping in stock for each machine type.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (3 aftermarket sellers) |
USD 32.30 to 33.98 |
30 Oct 2026 |
| WDPart |
USD 65.00 |
2 Nov 2026 |
| Diselmart |
USD 70.69 |
2 Nov 2026 |
| FridayParts |
USD 75.97 |
31 Oct 2026 |
| SINOCMP |
USD 85.00 |
30 Oct 2026 |
| Spare Part Mart |
USD 25.84 |
Today |
Our price of USD 25.84 is 20% to 70% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Volvo EC140C?
Yes, it was made for the Volvo EC140C, and 5 more listed under compatible equipment. Check the old sensor is marked 14560160 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the sensor on my Volvo EC140C?
On the Volvo EC140C, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the sensor needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Should I grease the connector?
A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.
Do the fault codes need clearing?
Usually. Clear them after fitting and run the machine, so old codes are not mistaken for a new fault.
Is this a genuine Volvo 14560160?
No. It is an aftermarket sensor made to replace the Volvo 14560160. It is not made by the original manufacturer; the number only shows what it replaces.