Volvo 14560161 is the hydraulic high pressure sensor with a stainless body, G1/4 thread with O ring and a sealed three pin plug. It is used on Volvo C and D series excavators. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
The same part is also sold as Volvo 17252660.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Hydraulic Pressure Sensor |
| Replaces |
Volvo 14560161 |
| Range |
400 kg/cm2 |
| Thread |
G1/4 |
| Cross references |
Volvo 17252660 |
| Fits |
Volvo EC140C, EC160C, EC180C, EC210C, EC235C, EC250D, EC300D, EC350D and EC480D excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
903289 |
| Country of Manufacture |
China |
Compatibility
Volvo machines
Volvo EC140C, EC160C, EC180C, EC210C, EC235C, EC250D, EC300D, EC350D and EC480D excavators
Check the part number on your old unit before ordering.
Part numbers
| Volvo Part No.(SPM Part No.)
|
Fits |
|
14560161(SPM-HEP-4708)
|
Volvo EC140C, EC160C, EC180C, EC210C, EC235C, EC250D, EC300D, EC350D and EC480D excavators |
|
17252660(SPM-HEP-4708)
|
Volvo EC140C, EC160C, EC180C, EC210C, EC235C, EC250D, EC300D, EC350D and EC480D excavators |
Applications & use cases
Wrong or missing reading
A failed sensor gives a dead or false gauge reading or a warning light.
Fault codes
Check the wiring and plug first; if the sensor itself reads out of range, replace it.
Corrosion
Connectors on machines take water and dirt. A corroded sensor is cheaper to replace than to chase.
Fleet spares
Common sensors are worth keeping in stock for each machine type.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay, aftermarket seller |
USD 33.73 |
31 Oct 2026 |
| FridayParts |
USD 45.03 |
31 Oct 2026 |
| SINOCMP |
USD 89.00 |
31 Oct 2026 |
| Spare Part Mart |
USD 18.46 |
Today |
Our price of USD 18.46 is 45% to 79% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Volvo EC140C?
Yes, it was made for the Volvo EC140C, and 8 more listed under compatible equipment. Check the old sensor is marked 14560161 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the sensor on my Volvo EC140C?
On the Volvo EC140C, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the sensor needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Do the fault codes need clearing?
Usually. Clear them after fitting and run the machine, so old codes are not mistaken for a new fault.
How do I test the old part first?
Read the fault codes, then check the plug and wiring for corrosion or a broken wire. A wiring fault reads the same as a failed sensor.
Is this a genuine Volvo 14560161?
No. It is an aftermarket sensor made to replace the Volvo 14560161. It is not made by the original manufacturer; the number only shows what it replaces.