No Products in the Cart
Aftermarket KT XB ceramic nozzle holder for Precitec ProCutter 2.0 and ProCutter Zoom 2.0 cutting heads. Replaces Precitec P0595-94097.
The KT XB lets a ProCutter 2.0 head run standard HP1.5 inch style D28 x M11 nozzles. The ceramic insulates the nozzle so the capacitive distance sensor reads only the nozzle to sheet gap, and keeps the nozzle concentric to the beam.
31 mm across and 13.5 mm high, with an M11 x 0.75 nozzle thread. Sold in packs of 1, 5 or 10.
| Replaces | Precitec P0595-94097 (KT XB) |
| Diameter | 31 mm |
| Height | 13.5 mm |
| Nozzle Thread | M11 x 0.75 |
| Takes | HP1.5 inch style D28 x M11 nozzles |
| Material | Technical ceramic body with threaded insert |
| Pack Options | 1 pack, 5 pack, 10 pack |
Precitec cutting heads
Takes HP1.5 inch style D28 x M11 nozzles. For M15 KT X nozzles use the KT X ceramic, P0595-92036.
| Dimensions | Precitec Part No.(SPM Part No.) | Fits |
|---|---|---|
| D31 x H13.5 mm, M11 x 0.75 nozzle thread | P0595-94097(SPM-LAS-3172) | ProCutter 2.0, ProCutter Zoom 2.0 |
| Ceramic | Fits |
|---|---|
| KT X, M15 (P0595-92036) | ProCutter 2.0, ProCutter Zoom 2.0 |
After a head collision
A crash into a tipped part or the sheet edge usually cracks the ceramic before anything else. A spare gets the machine cutting again in minutes.
Distance sensor faults
Unstable height control or sensor errors often trace to a cracked, dirty or loose ceramic. Replace it before recalibrating.
Planned maintenance
Inspect the ceramic at every nozzle change and replace it when chips, cracks or heat discolouration appear.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| LaserThings | USD 15.60 | 5 Oct 2026 |
| Quality Laser Supply | USD 30.00 | 6 Oct 2026 |
| Spare Part Mart | USD 12.48 | Today |
Our price of USD 12.48 is 20% to 58% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
KT XB (this part) takes M11 x 0.75 nozzles, the D28 HP1.5 inch style. KT X takes M15 x 1 KT X nozzles. Match the ceramic fitted now or its Precitec number.
No. It is an aftermarket ceramic made to fit the same heads. The Precitec number P0595-94097 is shown so you can match your part.
Every pack holds the same ceramic. The bigger the pack, the lower the price per piece, which suits shops that keep spares for collisions.
Screw it in by hand until it seats, then fit the nozzle. Do not use tools or overtighten; ceramic cracks under excess torque.
Yes. Shipping options and costs for your country are shown at checkout.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
By entering your email you agree to our terms and conditions.
WELCOME10
Tap below and it is applied to your basket automatically, so you will not need to type it at checkout. Check your email and confirm the address and we will tell you when that part is due again.
Apply it and keep shopping
