Sie haben keine Artikel im Warenkorb.
Ceramic nozzle holders (ceramic rings) for Raytools fiber laser cutting heads, in the five body sizes Raytools uses on its 2D and 3D heads: D32 M14, D28 M11, D21.4 M11, D21.4 M8 and D19.5 M8. Each is listed with its Raytools part number, exact dimensions and the heads it fits.
The ceramic ring insulates the nozzle from the head for capacitive height sensing and holds the nozzle in line with the beam. A cracked or dirty ring causes height sensing alarms.
Every size is sold in packs of 1, 5 or 10.
| Material | Alumina ceramic body with threaded brass insert |
| Function | Nozzle holder and capacitive sensing insulator |
| Sizes | D32 M14 (120274100B), D28 M11 (120515099A), D19.5 M8 3D (120572008B), D21.4 M11 (120515092B), D21.4 M8 3D (120515093A), D41 M11 (120515089A) |
| Pack Options | 1 pack, 5 pack, 10 pack |
| Part Number | Dimensions | Raytools Part No.(SPM Part No.) | Fits |
|---|---|---|---|
| D32 M14 (120274100B) | D32 x H12 mm, M14 x 0.75 | 120274100B(SPM-LAS-2106-D32M1412027410) | BT240, BMH109, BMH110, BMH111, BMH114 |
| D28 M11 (120515099A) | D28 x H12 mm, M11 x 0.75 | 120515099A(SPM-LAS-2106-D28M1112051509) | BT220, BM114, BM115, BS06K |
| D19.5 M8 3D (120572008B) | D19.5 x H12.4 mm, M8 x 0.75 | 120572008B(SPM-LAS-2106-D195M83D120572) | BT240, BMH109, BMH110, BMH111, BMH114, GF101 |
| D21.4 M11 (120515092B) | D21.4 x H16.9 mm, M11 x 0.75 | 120515092B(SPM-LAS-2106-D214M111205150) | BM06K, BD04K, BD08K |
| D21.4 M8 3D (120515093A) | D21.4 x H12.9 mm, M8 x 0.75 | 120515093A(SPM-LAS-2106-D214M83D120515) | BD04K, BD08K, BS12K, BS15K |
| D41 M11 (120515089A) | D41 x H12.9 mm, M11 x 0.75 | 120515089A(SPM-LAS-2106-D41M1112051508) | BS12K, BS15K, BS20K |
After a head collision
A crash into a tipped part or the sheet edge usually cracks the ceramic before anything else. A spare ring gets the machine cutting again in minutes.
Height sensing alarms
Erratic capacitive readings, height jumps or false collision alarms are frequently a cracked or dirty ceramic. Swap the ring before recalibrating the sensor.
Planned maintenance
Inspect the ring at every nozzle change and replace it when chips, cracks or heat discolouration appear.
3D and tube heads
The D19.5 and D21.4 M8 rings suit Raytools 3D and tube cutting heads that run the small M8 nozzle.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Laser Consumables | USD 7.38 | 5 Oct 2026 |
| LaserThings | USD 11.05 | 6 Oct 2026 |
| Quality Laser Supply | USD 32.00 | 6 Oct 2026 |
| Spare Part Mart (D32 M14, single) | USD 5.90 | Today |
Our price of USD 5.90 is 20% to 82% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Match your current ring's outer diameter and thread, or its Raytools part number in the table. D32 M14 heads take the D32 nozzle; D28 M11 heads take the D28 nozzle.
No. They are aftermarket rings made to the same dimensions. Raytools part numbers are listed so you can match your existing ring.
Screw it in by hand until it seats, then fit the nozzle. Do not use tools or overtighten; ceramic cracks under excess torque.
Check the ceramic for cracks, spatter or a loose fit before recalibrating. A damaged ring changes the sensor reading.
Yes. Shipping options and costs for your country are shown at checkout.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
