Sie haben keine Artikel im Warenkorb.
A pack of 10 copper laser cutting nozzles in the Precitec HP1.5" format: 28 mm outer diameter, 15 mm height and an M11 x 0.75 thread. Single layer sizes replace the Precitec P0591-57x DE HP1.5" CON series and double layer sizes replace the P0591-002 series, with every bore listed against its Precitec part number below.
Machined from high conductivity copper with a concentric bore, the nozzle keeps the assist gas centred on the beam and gives the capacitive sensor a clean electrode. It fits ProCutter, LightCutter, MiniCutter and HP series heads that use the HP1.5" nozzle, including ProCutter 2.0 heads fitted with the KT XB ceramic.
Use single layer nozzles for oxygen cutting of carbon steel and double layer nozzles for nitrogen or air cutting of stainless steel and aluminium. Packs of 10 so every bore you run has a spare.
| Pack Quantity | 10 nozzles, all the same layer and bore |
| Outer Diameter | 28 mm (1 3/32") |
| Height | 15 mm (19/32") |
| Thread | M11 x 0.75 |
| Material | Copper (high conductivity) |
| Layer | single layer or double layer |
| Bore Sizes | 0.8 mm to 6 mm (17 sizes) |
| Part Numbers | Precitec P0591-002-00008, P0591-002-00010, P0591-002-00012 and more (see table) |
Precitec cutting heads
Heads that take the D28 x H15 x M11 HP1.5" style nozzle. Check the nozzle currently fitted if unsure.
Machines commonly fitted with these heads
Fits these machines where they run a Precitec head that takes the HP1.5" nozzle.
| Bore | Single LayerPrecitec no. (SPM no.) | Double LayerPrecitec no. (SPM no.) |
|---|---|---|
| 0.8 mm | P0591-673-00008(SPM-LAS-2104-S08) | P0591-002-00008(SPM-LAS-2104-D08) |
| 1.0 mm | P0591-571-00010(SPM-LAS-2104-S10) | P0591-002-00010(SPM-LAS-2104-D10) |
| 1.2 mm | P0591-572-00012(SPM-LAS-2104-S12) | P0591-002-00012(SPM-LAS-2104-D12) |
| 1.3 mm | No Precitec equivalent(SPM-LAS-2104-S13) | No Precitec equivalent(SPM-LAS-2104-D13) |
| 1.4 mm | No Precitec equivalent(SPM-LAS-2104-S14) | No Precitec equivalent(SPM-LAS-2104-D14) |
| 1.5 mm | P0591-573-00015(SPM-LAS-2104-S15) | P0591-002-00015(SPM-LAS-2104-D15) |
| 1.6 mm | No Precitec equivalent(SPM-LAS-2104-S16) | P0591-002-00016(SPM-LAS-2104-D16) |
| 1.7 mm | No Precitec equivalent(SPM-LAS-2104-S17) | No Precitec equivalent(SPM-LAS-2104-D17) |
| 1.8 mm | P0591-574-00018(SPM-LAS-2104-S18) | P0591-002-00018(SPM-LAS-2104-D18) |
| 2.0 mm | P0591-575-00020(SPM-LAS-2104-S20) | P0591-002-00020(SPM-LAS-2104-D20) |
| 2.5 mm | P0591-576-00025(SPM-LAS-2104-S25) | P0591-002-00025(SPM-LAS-2104-D25) |
| 3.0 mm | P0591-577-00030(SPM-LAS-2104-S30) | P0591-002-00030(SPM-LAS-2104-D30) |
| 3.5 mm | No Precitec equivalent(SPM-LAS-2104-S35) | P0591-002-00035(SPM-LAS-2104-D35) |
| 4.0 mm | No Precitec equivalent(SPM-LAS-2104-S40) | P0591-002-00040(SPM-LAS-2104-D40) |
| 4.5 mm | No Precitec equivalent(SPM-LAS-2104-S45) | P0591-002-00045(SPM-LAS-2104-D45) |
| 5.0 mm | No Precitec equivalent(SPM-LAS-2104-S50) | P0591-002-00050(SPM-LAS-2104-D50) |
| 6.0 mm | No Precitec equivalent(SPM-LAS-2104-S60) | No Precitec equivalent(SPM-LAS-2104-D60) |
Carbon steel, oxygen
Use single layer nozzles. Small bores (0.8 to 1.2 mm) for thin sheet, 1.5 to 2.0 mm for most 3 to 10 mm plate, 2.5 mm and up for thick plate.
Stainless steel and aluminium, nitrogen or air
Use double layer nozzles. Larger bores are used on thicker material where more gas is needed.
Poor cut quality
Dross, a wandering kerf or bad piercing are often caused by a damaged or dirty nozzle. Fit a new nozzle of the same bore before changing other settings.
Height sensing faults
The nozzle is part of the capacitive height sensor. A worn or loose nozzle causes height alarms.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| LaserThings (pack of 10) | USD 25.35 | 5 Oct 2026 |
| Spare Part Mart (pack of 10) | USD 20.32 | Today |
Our price of USD 20.32 is approximately 20% less than this seller.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Heads that take the D28 x H15 x M11 HP1.5" style nozzle. Check the nozzle currently fitted if unsure.
No. It is an aftermarket nozzle made to the same 28 x 15 mm, M11 dimensions. Precitec part numbers are listed so you can match your existing nozzle.
10, all the same layer and bore size you select. Nozzles are only sold in packs of 10.
Single layer for oxygen cutting of carbon steel. Double layer for nitrogen or air cutting of stainless steel and aluminium, where the inner cone stabilises the high pressure jet.
Use your machine's cutting chart for the material and thickness. As a guide, thin sheet runs 0.8 to 1.5 mm, mid plate 1.5 to 2.5 mm and thick plate 3.0 mm and up. Bigger bores pass more gas at lower velocity.
When the bore is damaged, out of round or coated in spatter that will not clean off, or when height sensing becomes unstable. Busy machines often change nozzles daily.
Yes. Shipping options and costs for your country are shown at checkout.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
