Sie haben keine Artikel im Warenkorb.
Ingersoll Rand 23969298 is the condensate drain solenoid valve assembly with its strainer tee and copper pilot line. It is used on Ingersoll Rand rotary screw air compressors. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Drain Solenoid Valve |
| Replaces | Ingersoll Rand 23969298 |
| Type | Brass body condensate drain solenoid valve assembly with strainer tee and copper pilot tube |
| Coil | 110 V 50 Hz / 120 V 60 Hz, 10 W |
| Condition | New, aftermarket |
| Stat. HS-Code | 848180 |
| Ingersoll Rand Part No.(SPM Part No.) |
|---|
| 23969298(SPM-ACP-2755) |
Water in the air lines
A condensate drain valve that no longer opens lets water build up in the separator or receiver and carries it into the air system. A new valve brings the timed drain back.
Valve stuck open
A drain that hisses all the time wastes compressed air and can stop the compressor reaching pressure. Dirt or a worn seat is the usual cause.
Burned coil
If the drain never opens and the coil reads open circuit, the coil has failed. Check the supply voltage matches the coil.
Fitting tips
Vent the compressor first, fit a strainer ahead of the valve if the line carries rust or scale, and check the timer settings on the controller after fitting.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (3 aftermarket sellers) | USD 82.20 to 107.19 | 6 Oct 2026 |
| FridayParts | USD 146.89 | 8 Oct 2026 |
| Fab Heavy Parts | USD 164.52 | 8 Oct 2026 |
| Spare Part Mart | USD 65.76 | Today |
Our price of USD 65.76 is 20% to 60% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Ingersoll Rand 23969298. It is not made by or affiliated with Ingersoll Rand; the Ingersoll Rand part number is used only to show what it replaces.
It fits machines that take Ingersoll Rand 23969298. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same ports, mounting and coil connector as the original. Check the coil voltage matches your old valve, mark the ports before removing it, seal the threads and check for leaks under load.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
