Sie haben keine Artikel im Warenkorb.
Ingersoll Rand 47584295001 is the plug-in temperature probe on a cable with a sealed connector that reports temperature to the controller. It is used on Ingersoll Rand rotary screw air compressors. This aftermarket version has the same mounting and electrical connector as the original, so it plugs in and bolts on where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Temperature Sensor |
| Replaces | Ingersoll Rand 47584295001 |
| Type | Stainless steel temperature probe with compression fitting and nut, on a cable with a sealed plug-in connector |
| Connection | Plugs into the compressor wiring harness, as on the original 47584295001 |
| Condition | New, aftermarket |
| Stat. HS-Code | 902519 |
| Ingersoll Rand Part No.(SPM Part No.) |
|---|
| 47584295001(SPM-ACP-2764) |
High temperature shutdowns
A probe that reads high trips the compressor on discharge temperature even when it is running cool. Compare the reading with a thermometer on the discharge pipe.
Sensor fault on the controller
An open or shorted probe shows as a sensor fault and stops the compressor. Check the connector and cable for damage first.
Damaged cable or connector
The probe cable runs close to hot pipework. A melted or chafed cable is a common cause of erratic readings.
Fitting tips
Stop and vent the compressor and let it cool. Fit the probe to the same depth in its fitting, route the cable away from hot parts, and check the reading after start up.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (4 aftermarket sellers) | USD 175.00 to 186.66 | 6 Oct 2026 |
| Filme Compressor | USD 179.00 | 6 Oct 2026 |
| Spare Part Mart | USD 140.00 | Today |
Our price of USD 140.00 is 20% to 25% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
No. It is an aftermarket part made to fit in place of Ingersoll Rand 47584295001. It is not made by or affiliated with Ingersoll Rand; the Ingersoll Rand part number is used only to show what it replaces.
It fits machines that take Ingersoll Rand 47584295001. Machines change parts between serial number ranges, so check the number on your old part or in your parts manual.
It has the same mounting and electrical connector as the original. Check the plug and terminals match your old part, and test it before putting the machine back to work.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
