Sie haben keine Artikel im Warenkorb.
Aftermarket ceramic nozzle holders for Precitec ProCutter 2.0 and ProCutter Zoom 2.0 cutting heads: the KT XB ceramic (Precitec P0595-94097, M11 x 0.75 nozzle thread) and the KT X ceramic (P0595-92036, M15 x 1 nozzle thread).
The ceramic part insulates the nozzle from the head so the capacitive distance sensor reads only the nozzle to sheet gap, and positions the nozzle concentric to the beam. The KT XB lets ProCutter 2.0 heads run standard HP1.5 inch D28 x M11 nozzles; the KT X takes the larger M15 KT X nozzles.
Ceramics crack in head collisions and drift out of tolerance with heat and spatter, so keep a spare for every ProCutter on the floor. 1 pack, 5 pack and 10 pack.
| Material | Technical ceramic body with threaded insert |
| Fits | Precitec ProCutter 2.0, ProCutter Zoom 2.0 |
| Variants | KT XB (M11 x 0.75 nozzle) and KT X (M15 x 1 nozzle) |
| Pack Options | 1 pack, 5 pack, 10 pack |
Precitec cutting heads
KT XB takes HP1.5 inch style D28 x M11 nozzles; KT X takes KT X M15 nozzles.
| Part Number | Dimensions | Precitec Part No.(SPM Part No.) | Fits |
|---|---|---|---|
| KT XB, D31 M11 (P0595-94097) | D31 x H13.5 mm, M11 x 0.75 nozzle thread | P0595-94097(SPM-LAS-2113-KTXBD31M11P059) | ProCutter 2.0, ProCutter Zoom 2.0 |
| KT X, M15 (P0595-92036) | M15 x 1 nozzle thread | P0595-92036(SPM-LAS-2113-KTXM15P0595920) | ProCutter 2.0, ProCutter Zoom 2.0 |
After a head collision
The ceramic is the first part to break in a crash. A spare gets a ProCutter back cutting in minutes.
Distance sensor faults
Unstable height control or sensor errors often trace to a cracked, dirty or loose ceramic. Replace it before recalibrating.
Switching nozzle systems
Fit the KT XB to run standard D28 x M11 nozzles, or the KT X for M15 KT X nozzles.
Planned maintenance
Inspect at each nozzle change and replace when chipped, cracked or discoloured.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| LaserThings | USD 15.60 | 5 Oct 2026 |
| Quality Laser Supply | USD 30.00 | 6 Oct 2026 |
| Spare Part Mart | USD 12.48 | Today |
Our price of USD 12.48 is 20% to 58% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
KT XB takes M11 x 0.75 nozzles (the D28 HP1.5 inch style). KT X takes M15 x 1 KT X nozzles. Match the ceramic currently fitted or its Precitec number.
No. They are aftermarket ceramics made to fit the same heads. Precitec part numbers are listed so you can match your existing part.
Fit by hand to the head, then fit the nozzle. Do not overtighten; ceramic cracks under excess torque.
Yes. Shipping options and costs for your country are shown at checkout.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
