Sie haben keine Artikel im Warenkorb.
Aftermarket collimating lens set for Raytools laser cutting heads: one bi-convex and one meniscus lens, 30 mm diameter, 100 mm focal length.
Matches Raytools lens part numbers 110255AAEBHE0096, 110255AACBHE0095, 110255AAFBHE0089, 110255AACBHE0090. Where Raytools makes this size at more than one power rating, each number is listed. Fused silica, AR coated for 1064 nm. Fits into your existing lens holder.
| Replaces | 110255AAEBHE0096, 110255AACBHE0095, 110255AAFBHE0089, 110255AACBHE0090 |
| Diameter | 30 mm |
| Focal Length | 100 mm |
| Contents | 1 bi-convex lens + 1 meniscus lens |
| Material | Fused silica, AR coated for 1064 nm |
| Pack | Dimensions | Raytools Part No.(SPM Part No.) | Fits |
|---|---|---|---|
| Collimating D30 F100 | D30 mm, F100 mm, 2kW / 3.3kW, bi-convex + meniscus | 110255AAEBHE0096(SPM-LAS-2147) | BT240S, BM110, BM111 |
| Collimating D30 F100 | D30 mm, F100 mm, 2kW / 3.3kW, bi-convex + meniscus | 110255AACBHE0095(SPM-LAS-2147) | BT240S, BM110, BM111 |
| Collimating D30 F100 | D30 mm, F100 mm, 2kW / 3.3kW, bi-convex + meniscus | 110255AAFBHE0089(SPM-LAS-2147) | BT240S, BM110, BM111 |
| Collimating D30 F100 | D30 mm, F100 mm, 2kW / 3.3kW, bi-convex + meniscus | 110255AACBHE0090(SPM-LAS-2147) | BT240S, BM110, BM111 |
Replacing a damaged lens
Pitting or burn marks on a lens show as slow piercing, a wide kerf and lost cutting power. Replace both lenses together.
Keeping the holder
If the lens holder is undamaged, fitting a new pair is cheaper than a complete assembly.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| American Photonics | USD 278.00 | 6 Oct 2026 |
| Spare Part Mart | USD 71.40 | Today |
Our price of USD 71.40 is approximately 74% less than this seller.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Match the diameter, focal length and the part numbers on your current lenses or holder.
No. It is sold as an aftermarket part made to the same specification. The OEM part numbers are shown so you can match your existing optics.
In a clean area, by the edges only, with clean gloves. Fingerprints burn into the coating under laser power.
Prices depend on your postcode.
In USD for the quantity selected. The exact cost is confirmed at checkout.
