Sie haben keine Artikel im Warenkorb.
| Part Type | Lubrication and return filter element |
| Replaces | Internormen 01.E 1201.3VG.10.E.P (article 307926) |
| Filtration Media | Pleated glass fibre |
| Filtration Rating | 5 µm, Internormen 3VG glass fibre grade |
| Flow Direction | Out-In |
| Seal Material | Nitrile (NBR) |
| Largest Outer Diameter | 142 mm (5 19/32") |
| Largest Inner Diameter | 94 mm (3 11/16") |
| Total Height | 503 mm (19 13/16") |
| Nominal Size | 1201 |
| End Configuration | Single open end |
| Collapse Rating | 10 bar (145 psid) |
| Stat. HS-Code | 842129 |
| Brand | Code |
|---|---|
| Internormen | 01.E1201.3VG.10.E.P |
| Internormen | 307926 |
| Spare Part Mart | SPM-HYD-2229 |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| SONA Filtration | USD 184.47 | 8 Oct 2026 |
| Hydrafil | USD 520.95 | 8 Oct 2026 |
| Spare Part Mart | USD 147.58 | Today |
Our price of USD 147.58 is 20% to 72% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
This element replaces Internormen 01.E 1201.3VG.10.E.P (article 307926). It fits any filter housing built to take that element: 142 mm outside diameter, 94 mm bore, 503 mm long, single open end, with nitrile (NBR) seals.
To check, read the element number on the old element or on the housing data plate. Internormen element numbers read type, nominal size, grade, collapse rating and seal in that order, so 01.E 60 means the size 60 pressure element and 01.E 1201 the size 1201 element. Order the same size and grade as the one you are replacing.
Turbine and compressor lube oil
Lube oil systems on turbines and large compressors run big return filters in the 1201 size. Fine 3VG media protects journal bearings.
Gearbox lube stations
Industrial and wind gearbox lube skids use high flow elements to keep gear and bearing wear down. Spare elements make the change quick.
Paper machine and mill hydraulics
Paper machines, rolling mills and presses use large return filters on big tanks. The 1201 size gives a long change interval.
Large hydraulic power units
Central power units with high return flows use this element size at low pressure drop.
No. It is an aftermarket element made to the dimensions and filtration grade of the Internormen 01.E1201.3VG.10.E.P (article number 307926). It is not made by or affiliated with Internormen or Eaton, and their part numbers are used only to show what it replaces.
Yes if your housing takes the Internormen 01.E1201.3VG.10.E.P (article 307926). Check the old element: 142 mm outside diameter, 94 mm bore and 503 mm overall length.
3VG is Internormen's code for its finest glass fibre (VG) media grade, rated at 5 µm retention. It is the grade used ahead of servo and proportional valves and on lube systems where fine particles cause wear.
In 01.E1201.3VG.10.E.P, E is the element design and the final P means nitrile (NBR) seals; the same element with V at the end has fluorocarbon (Viton) seals. The 10 in the code is the 10 bar collapse rating.
Change it when the housing's differential pressure indicator shows the element is loaded, or at the interval in your maintenance plan, whichever comes first. A loaded element that goes into bypass lets dirty oil through.
Yes, we ship worldwide. Shipping is calculated at checkout, and every order is covered by our 30 day money back guarantee and price beat guarantee.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
