Bosch 0460413018 is the VE type distributor injection pump: cast alloy body with the boost compensator on top, governor spring and levers, the black fuel shutoff solenoid block, three capped delivery valves and a keyed drive shaft. It is used on Iveco / Case 2.9 L engines. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as Iveco 500324965.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Fuel Injection Pump |
| Replaces |
Bosch 0460413018 |
| Engine |
Iveco / Case / New Holland 2.9 L, 53 kW |
| Cross references |
Iveco 500324965 |
| Fits |
Iveco, Case and New Holland machines with the 2.9 L 53 kW three cylinder diesel engine |
| Condition |
New, aftermarket |
| Stat. HS-Code |
841330 |
| Country of Manufacture |
China |
Compatibility
Machines
Iveco, Case and New Holland machines with the 2.9 L 53 kW three cylinder diesel engine
Check the part number on your old unit before ordering.
Part numbers
| Bosch Part No.(SPM Part No.)
|
Fits |
|
0460413018(SPM-HEP-5138)
|
Iveco, Case and New Holland machines with the 2.9 L 53 kW three cylinder diesel engine |
|
500324965(SPM-HEP-5138)
|
Iveco, Case and New Holland machines with the 2.9 L 53 kW three cylinder diesel engine |
Applications & use cases
Hard starting and low power
A worn injection pump delivers less fuel at lower pressure: long cranking and weak power under load.
Smoke and uneven running
Uneven delivery between cylinders shows as smoke and rough running.
Fuel leaks
Leaks from the pump body or shaft seal mean it is time to replace it.
Fitting tips
Set the pump timing to the engine maker's figure, bleed the fuel system, and use clean fuel and new filters.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (4 aftermarket sellers) |
USD 593.27 to 627.28 |
2 Nov 2026 |
| SINOCMP |
USD 669.00 |
2 Nov 2026 |
| Spare Part Mart |
USD 474.62 |
Today |
Our price of USD 474.62 is 20% to 29% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Iveco?
Yes, it was made for the Iveco, and 2 more listed under compatible equipment. Check the old fuel injection pump is marked 0460413018 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the fuel injection pump on my Iveco?
On the Iveco, often 5,000 to 10,000 hours with clean fluid, much less with dirt or air in the system. It is usually changed on condition, not by hours.
What are the signs the fuel injection pump needs replacing?
Leaks from the seal or weep hole, noise or whining, overheating, or falling pressure or flow under load.
What should I do with the gasket faces?
Clean them right back to metal and fit the new gasket or O-ring dry, unless the engine manual calls for sealant.
Should I prime it before starting?
Yes. Fill the pump and its suction line with clean fluid before the first start. Running it dry, even for a few seconds, can score it.
Is this a genuine Bosch 0460413018?
No. It is an aftermarket fuel injection pump made to replace the Bosch 0460413018. It is not made by the original manufacturer; the number only shows what it replaces.