Caterpillar 154-3064 is the cartridge solenoid valve: a threaded valve cartridge with its coil, and a green two wire lead to a grey two pin Deutsch style plug. It is used on Caterpillar 140H and 160H motor graders. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Solenoid Valve |
| Replaces |
Caterpillar 154-3064 |
| Connector |
2 pin Deutsch style |
| Fits |
Caterpillar 12H, 14H, 140H, 140K, 160H, 160K, 163H and 24H motor graders |
| Condition |
New, aftermarket |
| Stat. HS-Code |
848180 |
| Country of Manufacture |
China |
Compatibility
Caterpillar machines
Caterpillar 12H, 14H, 140H, 140K, 160H, 160K, 163H and 24H motor graders
Check the part number on your old unit before ordering.
Part numbers
| Caterpillar Part No.(SPM Part No.)
|
Fits |
|
154-3064(SPM-HEP-4584)
|
Caterpillar 12H, 14H, 140H, 140K, 160H, 160K, 163H and 24H motor graders |
|
1543064(SPM-HEP-4584)
|
Caterpillar 12H, 14H, 140H, 140K, 160H, 160K, 163H and 24H motor graders |
Applications & use cases
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid valve or its coil is the usual suspect.
Drift or creep
A valve that does not seal lets cylinders creep. A new valve restores holding.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water first.
Fleet spares
Keep the common valves for your machines in stock to cut downtime.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| eBay (2 aftermarket sellers) |
USD 74.90 to 75.00 |
30 Oct 2026 |
| eHeParts |
USD 96.00 |
3 Nov 2026 |
| SINOCMP |
USD 149.00 |
30 Oct 2026 |
| FridayParts |
USD 208.95 |
31 Oct 2026 |
| Spare Part Mart |
USD 61.79 |
Today |
Our price of USD 61.79 is 18% to 70% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Caterpillar 12H?
Yes, it was made for the Caterpillar 12H, and 7 more listed under compatible equipment. Check the old solenoid valve is marked 154-3064 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the solenoid valve on my Caterpillar 12H?
On the Caterpillar 12H, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the solenoid valve needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Does the voltage matter?
Yes. Many machines have 12 V and 24 V versions of the same solenoid valve. Check the old part or the machine plate before fitting.
How do I test a solenoid coil?
Measure the coil resistance with a multimeter and check for supply voltage at the plug with the circuit on. An open coil reads infinite.
Is this a genuine Caterpillar 154-3064?
No. It is an aftermarket solenoid valve made to replace the Caterpillar 154-3064. It is not made by the original manufacturer; the number only shows what it replaces.