Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Caterpillar 478-8207 Aftermarket Solenoid Valve
Caterpillar 478-8207 Aftermarket Solenoid Valve, second view
Caterpillar 478-8207 Aftermarket Solenoid Valve, third view

Caterpillar 478-8207 Aftermarket Solenoid Valve

$74.06 USD
  • SKU: SPM-HEP-4644-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 0.6 kg (1.32 lb)
Nitrile (NBR) O-Ring Assortment Kit, Metric, ...: $9.78 $9.30 with this part
Universal Filter Strap Wrench for Oil, Fuel a...: $9.59 $9.12 with this part
Members earn 74 points on this order. Join today to earn 200 points off your first order.

Caterpillar 478-8207 is the screw-in cartridge solenoid valve: a cylindrical coil with a side connector, a hex nut on the coil end and a threaded valve body with cross drilled ports and O-rings. It is used on Caterpillar D6 and D8R tractors. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Solenoid Valve
Replaces Caterpillar 478-8207
Type Screw-in cartridge
Connector On the side of the coil
Fits Caterpillar C7.1, C9 and C15 engines in D5R2, D6, D8R, D10T2 and D11 track-type tractors
Condition New, aftermarket
Stat. HS-Code 848180
Country of Manufacture China
Compatibility

Caterpillar machines

Caterpillar C7.1, C9 and C15 engines in D5R2, D6, D8R, D10T2 and D11 track-type tractors

Check the part number on your old unit before ordering.

Part numbers
Caterpillar Part No.(SPM Part No.) Fits
478-8207(SPM-HEP-4644) Caterpillar C7.1, C9 and C15 engines in D5R2, D6, D8R, D10T2 and D11 track-type tractors
4788207(SPM-HEP-4644) Caterpillar C7.1, C9 and C15 engines in D5R2, D6, D8R, D10T2 and D11 track-type tractors

Applications & use cases

Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid valve or its coil is the usual suspect.

Drift or creep
A valve that does not seal lets cylinders creep. A new valve restores holding.

Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water first.

Fleet spares
Keep the common valves for your machines in stock to cut downtime.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay (5 aftermarket sellers) USD 92.57 to 204.74 31 Oct 2026
StopSolenoid USD 148.60 31 Oct 2026
Buy Machinery USD 169.55 31 Oct 2026
FridayParts USD 178.03 31 Oct 2026
Spare Part Mart USD 74.06 Today

Our price of USD 74.06 is 20% to 64% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Caterpillar C7.1?

Yes, it was made for the Caterpillar C7.1, and 4 more listed under compatible equipment. Check the old solenoid valve is marked 478-8207 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the solenoid valve on my Caterpillar C7.1?

On the Caterpillar C7.1, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.

What are the signs the solenoid valve needs replacing?

A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.

Do the fault codes need clearing?

Usually. Clear them after fitting and run the machine, so old codes are not mistaken for a new fault.

How do I test a solenoid coil?

Measure the coil resistance with a multimeter and check for supply voltage at the plug with the circuit on. An open coil reads infinite.

Is this a genuine Caterpillar 478-8207?

No. It is an aftermarket solenoid valve made to replace the Caterpillar 478-8207. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

Related products

BACK TO TOP
Chat directly with MikeThe founder