Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Caterpillar 600-8815 Aftermarket Solenoid Valve
Caterpillar 600-8815 Aftermarket Solenoid Valve
Caterpillar 600-8815 Aftermarket Solenoid Valve

Caterpillar 600-8815 Aftermarket Solenoid Valve

$88.40 USD
  • SKU: SPM-HEP-4645-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 0.4 kg (0.88 lb)
Nitrile (NBR) O-Ring Assortment Kit, Metric, ...: $9.78 $9.30 with this part
Universal Filter Strap Wrench for Oil, Fuel a...: $9.59 $9.12 with this part
Members earn 88 points on this order. Join today to earn 200 points off your first order.

Caterpillar 600-8815 is the proportional cartridge solenoid valve: a plated coil with a two hole mounting flange, a brown plug on the coil end and a long spool with O-rings and a fine screen. It is used on Caterpillar 740C and 745C trucks. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Solenoid Valve
Replaces Caterpillar 600-8815
Type Flange mounted cartridge
Marking 600-8815 R01
Fits Caterpillar G3512 engines, 12K, 140K and 160K motor graders, 735C, 740C and 745C articulated trucks and D5, D6N, D6R and D8T tractors
Condition New, aftermarket
Stat. HS-Code 848180
Country of Manufacture China
Compatibility

Caterpillar machines

Caterpillar G3512 engines, 12K, 140K and 160K motor graders, 735C, 740C and 745C articulated trucks and D5, D6N, D6R and D8T tractors

Check the part number on your old unit before ordering.

Part numbers
Caterpillar Part No.(SPM Part No.) Fits
600-8815(SPM-HEP-4645) Caterpillar G3512 engines, 12K, 140K and 160K motor graders, 735C, 740C and 745C articulated trucks and D5, D6N, D6R and D8T tractors
6008815(SPM-HEP-4645) Caterpillar G3512 engines, 12K, 140K and 160K motor graders, 735C, 740C and 745C articulated trucks and D5, D6N, D6R and D8T tractors

Applications & use cases

Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid valve or its coil is the usual suspect.

Drift or creep
A valve that does not seal lets cylinders creep. A new valve restores holding.

Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water first.

Fleet spares
Keep the common valves for your machines in stock to cut downtime.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay (5 aftermarket sellers) USD 110.50 to 119.70 31 Oct 2026
Amazon (Suvip parts) USD 115.00 3 Nov 2026
Amazon (Generic) USD 125.00 3 Nov 2026
FridayParts USD 125.69 31 Oct 2026
SoonParts USD 159.00 31 Oct 2026
Spare Part Mart USD 88.40 Today

Our price of USD 88.40 is 20% to 44% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it replace my Caterpillar 600-8815?

Yes, it is a direct replacement for the Caterpillar 600-8815 with the same fitting.

How often should I replace the Caterpillar 600-8815?

There is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.

What are the signs the solenoid valve needs replacing?

A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.

Should I grease the connector?

A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.

Does the voltage matter?

Yes. Many machines have 12 V and 24 V versions of the same solenoid valve. Check the old part or the machine plate before fitting.

Is this a genuine Caterpillar 600-8815?

No. It is an aftermarket solenoid valve made to replace the Caterpillar 600-8815. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

Related products

BACK TO TOP
Chat directly with MikeThe founder