Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Caterpillar 630-0153 Aftermarket Electric Actuator
Caterpillar 630-0153 Aftermarket Electric Actuator
Caterpillar 630-0153 Aftermarket Electric Actuator, third view

Caterpillar 630-0153 Aftermarket Electric Actuator

$340.79 USD
  • SKU: SPM-HEP-5230-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 6.0 kg (13.23 lb)
Members earn 340 points on this order. Join today to earn 200 points off your first order.

Caterpillar 630-0153 is the 24 volt electric linear actuator: the black motor and gearbox housing, the aluminium tube with the extending rod and rod end, and the cable with its sealed plug. It is used on Caterpillar 950M to 972XE wheel loaders. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.

The same part is also sold as Caterpillar 581-2664.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Electric Actuator
Replaces Caterpillar 581-2664
Voltage 24 V
Type Electric linear actuator
Machine Caterpillar 950M, 962M, 966, 966M, 966XE, 972, 972M, 972XE
Cross references Caterpillar 630-0153
Fits Caterpillar 950M, 962M, 966, 966M, 966XE, 972, 972M and 972XE wheel loaders
Condition New, aftermarket
Stat. HS-Code 850131
Country of Manufacture China
Compatibility

Caterpillar machines

Caterpillar 950M, 962M, 966, 966M, 966XE, 972, 972M and 972XE wheel loaders

Check the part number on your old unit before ordering.

Part numbers
Caterpillar Part No.(SPM Part No.) Fits
581-2664(SPM-HEP-5230) Caterpillar 950M, 962M, 966, 966M, 966XE, 972, 972M and 972XE wheel loaders
630-0153(SPM-HEP-5230) Caterpillar 950M, 962M, 966, 966M, 966XE, 972, 972M and 972XE wheel loaders

Applications & use cases

Function stops working
When the actuator motor or gearbox fails, the function it drives stops moving or moves only part of its stroke.

Slow or jerky travel
Worn gears and a tired motor make the rod move slowly or in steps, and the machine may log a position fault.

Water in the motor
A cracked housing or damaged cable lets water into the motor and it seizes. Replace the actuator rather than drying it out.

Fitting tips
Disconnect the battery, note the rod position, fit the new actuator with new pins and clips, then cycle it through its full stroke before work.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
FridayParts USD 439.95 3 Nov 2026
eBay, aftermarket seller USD 448.50 3 Nov 2026
eHeParts USD 460.00 3 Nov 2026
SINOCMP USD 599.00 3 Nov 2026
Spare Part Mart USD 340.79 Today

Our price of USD 340.79 is 23% to 43% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Caterpillar 950M?

Yes, it was made for the Caterpillar 950M, and 7 more listed under compatible equipment. Check the old electric actuator is marked 630-0153 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the electric actuator on my Caterpillar 950M?

On the Caterpillar 950M, it depends on hours and working conditions. Follow the machine service schedule, and change it when it shows wear rather than waiting for it to fail.

What are the signs the electric actuator needs replacing?

Leaks, noise, loss of performance, or visible wear compared with a new part. If in doubt, measure it against the sizes in the specifications.

Can I return it if it does not fit?

Yes. Every order is covered by our 30 day money back guarantee. Keep it unused and in its packaging.

Should I keep the old part?

Keep it until the new one is fitted and running. It is the quickest way to compare sizes, connectors and mounting if anything looks different.

Is this a genuine Caterpillar 630-0153?

No. It is an aftermarket electric actuator made to replace the Caterpillar 630-0153. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

Related products

BACK TO TOP
Chat directly with MikeThe founder