No Products in the Cart
Universal Filter Strap Wrench for Oil, Fuel a...: 
Copper Sealing Washer Assortment Kit, M5 to M...: | Filtration Media | Impregnated Paper 10 µm |
| Media type | Impregnated Paper |
| Filtration Rating | 10 µm |
| Total Height | 210 mm (8 9/32") |
| Thread | UNF 1.1/4 inch Female Bottom 12 |
| Type | UNF |
| Thread Size | 1.1/4 inch |
| Orientation | Female |
| Position | Bottom |
| Bypass Valve Opening Pressure | 12 bar (174 PSI) |
| Working Pressure | 5 bar (73 PSI) |
| Outer Diameter | 95.5 mm (3 3/4") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Apureda | AO0998 |
| Cim-Tek | 70321 |
| Digoema | DGMH378 |
| Donaldson | P160479 |
| Donaldson | P161672 |
| Donaldson | P162043 |
| Donaldson | P164351 |
| Donaldson | P164360 |
| Fai Filtri | CS-070-5-0-P10-A |
| Fleetguard | HF6450 |
| Fleetguard | HF6451 |
| Fram | P6943 |
| Grove | 7437000179 |
| Grove | 9437100179 |
| Grove | 9437100880 |
| Hastings | HF728 |
| Hydac | MFE811102 |
| Oxfil | OF.8563 |
| Spare Part Mart | SPM-OIL-1296 |
| Volvo | 12973159 |
| Volvo | 129731592 |
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| Oxfil | USD 19.05 | 16 Oct 2026 |
| FilterFinder Online | USD 22.00 | 14 Oct 2026 |
| G&T Engine Parts | USD 51.22 | 14 Oct 2026 |
| Spare Part Mart | USD 15.24 | Today |
Our price of USD 15.24 is 20% to 70% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
High-duty-cycle hydraulic systems
In continuous-duty applications like mobile hydraulics or stationary power units, oil cleanliness directly impacts component life. The 10-micron media captures wear-causing particles, reducing the risk of valve stiction and pump cavitation over long operating hours.
Dusty or contaminated working environments
Equipment operating in quarries, construction sites, or agricultural fields ingests airborne dirt that loads the oil with abrasive particles. This filter’s impregnated paper holds more debris while maintaining flow, extending service intervals even in harsh conditions.
Preventive maintenance scheduling
Replacing filters at predictable intervals prevents unscheduled downtime. The bypass valve ensures oil circulation during cold starts or if the element becomes loaded, giving technicians a safety margin without risking lubrication starvation.
Fleet consolidation and inventory simplification
For workshops maintaining mixed-brand machinery, this cross-referenced filter reduces the number of part numbers in stock. One this filter can replace filters from Hydac, Donaldson, Fleetguard, and others, simplifying ordering and shelf management.
Check your existing filter’s thread size, overall height, and outer diameter. This filter uses a UNF 1 1/4-inch bottom female thread, stands 210 mm tall, and has a 95.5 mm outer diameter. It is a direct physical match for aftermarket filters used in Hydac equipment and cross-references to the brands listed in our product data.
The element is rated at 10 microns using impregnated paper media. This rating means it removes particles 10 micrometres and larger, providing a balance of particle capture and oil flow for general hydraulic and lubrication circuits.
Thread: UNF 1 1/4 inch, female, bottom location. Total height: 210 mm. Outer diameter of the canister: 95.5 mm. The bypass valve opens at 12 bar, and the normal working pressure is 5 bar. Always verify your housing’s clearance and thread before ordering.
This filter is an aftermarket filter built to match the dimensions and performance of the original brands it cross-references. It is not produced or endorsed by those manufacturers. It offers reliable filtration at a lower cost, covered by our 30-day money-back guarantee.
Installation follows standard spin-on filter procedures. Remove the old filter, clean the mounting surface, lightly oil the new gasket, and spin on by hand until the gasket contacts, then tighten per the filter’s instructions. Check for leaks after startup and confirm oil level. No special tools are required.
We provide a 30-day money-back guarantee on this filter and a price-beat guarantee. Orders ship worldwide with tracking so you can monitor progress. We do not quote specific day counts or months for warranty since service conditions vary, but we stand behind the product’s quality.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
