No Products in the Cart
| Differential Pressure | 50 mbar |
| Filtration Media | Borosilicate micro glass fibre 0.1 µm |
| Media type | Borosilicate micro glass fibre |
| Filtration Rating | 0.1 µm |
| Body Height | 508 mm (20") |
| Maximum Working Temperature | 65°C (149°F) |
| Minimum Working temperature | 1.5°C (35°F) |
| Outer Diameter | 86 mm (3 3/8") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Alup | MA20/30 |
| Atlas Copco | 2255291730 |
| Donaldson | FF 20/3 |
| Donaldson | FF 20/30 |
| Gardner Denver | GDF20/30 |
| Grassair | GVE360 |
| HiFi Filter | SI 10235 |
| Kaeser | 20/30VH |
| Kaeser | 9.2119.0010 |
| Kaeser | 9.4542.1 |
| Mann-Filter / Mann & Hummel | LD 9012 |
| Noitech | NM 017490 |
| Omega Air | ODO 2030 FF |
| Oxfil | IF.9174 |
| Sotras | SM 9174 |
| Spare Part Mart | SPM-INF-1170 |
| Ultrafilter | FF20/30 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Dusty Environments
In dusty industrial settings such as woodworking or cement plants, the 0.1 µm borosilicate micro glass fibre media captures fine airborne particles before they enter sensitive equipment, reducing wear and tear on downstream components.
Continuous-Duty Operations
For facilities running compressed air systems 24/7, the low 50 mbar differential pressure minimizes energy consumption while maintaining consistent filtration performance over extended periods.
Maintenance Scheduling Simplification
By standardizing on this filter across multiple compressor brands (Alup, Atlas Copco, Gardner Denver, Kaeser), maintenance teams can streamline inventory and reduce the risk of installing the wrong filter during changeouts.
Inventory Consolidation
Facilities using a mix of equipment from different manufacturers can replace multiple filter part numbers with a single this filter, simplifying stock management and reducing downtime due to stockouts.
Check your compressor's manual or existing filter part number. If it matches one of the cross-referenced brands (Alup, Atlas Copco, Donaldson, etc.), this filter is a direct replacement. For specific model numbers not listed, contact our support team with your compressor brand and model for verification.
This filter uses borosilicate micro glass fibre media with a 0.1 µm filtration rating, effective for removing fine particles and oil aerosols from compressed air.
The filter has an outer diameter of 86 mm and a body height of 508 mm. It is designed to fit standard in-line filter housings; however, thread specifications are not provided. Ensure your housing accepts these dimensions.
This is an aftermarket replacement, not genuine OEM. It is built to the original dimensions and ratings and is a direct replacement for filters from brands like Alup, Atlas Copco, Gardner Denver, and others listed.
Installation is similar to most in-line filters: depressurize the system, remove the old filter, clean the housing, and install the new filter. Ensure the O-ring is seated properly. Refer to your equipment manual for specific instructions.
We offer worldwide shipping with tracking, a 30-day money-back guarantee, and a price-beat guarantee. Contact us for specific shipping times to your location.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
We will also tell you when that part is due again. A couple of emails a month, and you can stop them from any one of them.
WELCOME10
Use it on your first order. Check your email and confirm the address so we can send you the reminders too.
