No Products in the Cart
Hypertherm 020424 is the 200A shield used on the MAX200 machine torch. This is an aftermarket shield made to the same part number and fit, for air plasma cutting.
Machined copper shield that screws on over the nozzle and keeps spatter off it while piercing and cutting.
Check the number on your old part or in the torch manual before ordering: it should read 020424. Sold in packs of 2.
| Pack Size | 2 pieces per pack |
| Part number | 020424 |
| Part | Plasma shield |
| Rating | 200A |
| Fits | MAX200 / HT2000 (Hypertherm) |
| Material | Copper |
| Type | Aftermarket replacement |
| Stat. HS-Code | 851590 |
| Country of Manufacture | China |
| Trademarks | Hypertherm and MAX200 are trademarks of their owners. Names and part numbers are for reference only; this is an aftermarket part, not made or approved by them. |
Hypertherm MAX200 / HT2000
Match the part number on your old part before ordering.
| Dimensions | Hypertherm Part No.(SPM Part No.) |
|---|---|
| 200A | 020424(SPM-PLA-4932) |
Protecting the nozzle
The shield keeps spatter and molten metal off the nozzle, especially when piercing. A shield clogged with spatter or with a damaged face should be replaced.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay (5 aftermarket sellers) (pack of 2) | USD 12.15 to 13.47 | 1 Nov 2026 |
| Weldcut (Poland) (pack of 2) | USD 22.46 | 1 Nov 2026 |
| Arc-Zone (2 singles) | USD 84.06 | 1 Nov 2026 |
| Spare Part Mart (pack of 2) | USD 9.65 | Today |
Our price of USD 9.65 is 21% to 89% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Hypertherm MAX200 / HT2000 (Hypertherm). Check the old plasma shield is marked 020424 or one of the cross references, because makers change parts between serial ranges.
On the Hypertherm MAX200 / HT2000 (Hypertherm), laser and plasma nozzles wear in days to weeks, depending on hours of arc or beam time, material and gas. Change it on condition, not by date.
An oval or nicked orifice, spatter stuck on the tip, more dross, a wider cut or bevel on one side, and height sensing errors.
Look at the orifice: if it is oval, nicked or has spatter stuck to it, the cut quality falls. Change it before it damages the parts behind it.
Centre the nozzle on the beam and recalibrate the height sensor. A new nozzle off centre cuts on one side only.
No. It is an aftermarket plasma shield made to replace the Hypertherm 020424. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
