John Deere RE177538 is the screw in hydraulic cartridge solenoid valve: the round coil can with its two pin connector, and the ported spool with O-rings and a mesh screen. It is used on John Deere 8000 series tractors. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Hydraulic Solenoid Valve |
| Replaces |
John Deere RE177538 |
| Type |
Hydraulic cartridge solenoid valve |
| Connector |
2 pin |
| Tractors |
John Deere 2854, 6810, 8110 to 8530, 8225R to 8360RT |
| Fits |
John Deere 2854, 6810, 8110, 8120, 8130, 8230, 8330, 8430 and 8530 tractors and the 8225R to 8360RT range |
| Condition |
New, aftermarket |
| Stat. HS-Code |
848180 |
| Country of Manufacture |
China |
Compatibility
John Deere machines
John Deere 2854, 6810, 8110, 8120, 8130, 8230, 8330, 8430 and 8530 tractors and the 8225R to 8360RT range
Check the part number on your old unit before ordering.
Part numbers
| John Deere Part No.(SPM Part No.)
|
Fits |
|
RE177538(SPM-HEP-5326)
|
John Deere 2854, 6810, 8110, 8120, 8130, 8230, 8330, 8430 and 8530 tractors and the 8225R to 8360RT range |
Applications & use cases
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid valve or its coil is the usual suspect.
Drift or creep
A valve that does not seal lets cylinders creep. A new valve restores holding.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water first.
Fleet spares
Keep the common valves for your machines in stock to cut downtime.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| Fab Heavy Parts |
USD 164.63 |
4 Nov 2026 |
| Buy Machinery Parts |
USD 176.39 |
4 Nov 2026 |
| YEM Parts |
USD 185.74 |
4 Nov 2026 |
| MyMROmarts |
USD 216.31 |
4 Nov 2026 |
| eBay, aftermarket seller |
USD 300.25 |
4 Nov 2026 |
| Spare Part Mart |
USD 96.00 |
Today |
Our price of USD 96.00 is 42% to 68% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my John Deere 2854?
Yes, it was made for the John Deere 2854, and 8 more listed under compatible equipment. Check the old solenoid valve is marked RE177538 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the solenoid valve on my John Deere 2854?
On the John Deere 2854, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the solenoid valve needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
Does the voltage matter?
Yes. Many machines have 12 V and 24 V versions of the same solenoid valve. Check the old part or the machine plate before fitting.
Should I grease the connector?
A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.
Is this a genuine John Deere RE177538?
No. It is an aftermarket solenoid valve made to replace the John Deere RE177538. It is not made by the original manufacturer; the number only shows what it replaces.