No Products in the Cart
| Differential Pressure | 10 mbar |
| Filtration Media | Cellulose 3 µm 6 |
| Media type | Cellulose |
| Filtration Rating | 3 µm |
| Body Height | 50 mm (1 31/32") |
| Maximum Working Temperature | 65°C (149°F) |
| Minimum Working temperature | 1.5°C (35°F) |
| Outer Diameter | 60 mm (2 3/8") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Atlas Copco | 2255290929 |
| Atlas Copco | 2255291360 |
| Hankison | E9-12 |
| HiFi Filter | SI 46121 |
| Kaeser | 9.4812.0 |
| Kaeser | E-B-6 |
| Mann-Filter / Mann & Hummel | LD 6008/2 |
| Noitech | NM 000211 |
| Omega Air | OHK 12 E9/P |
| Omega Air | OKA 6 E-B/P |
| Oxfil | IF.9980 |
| Sotras | SM 9980 |
| Spare Part Mart | SPM-INF-1123 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Continuous-Duty Compressed Air Systems
In facilities running compressors around the clock, this filter's low 10 mbar differential pressure minimizes energy consumption while maintaining consistent filtration. This helps reduce operating costs over long production runs.
High-Humidity Environments
With a minimum working temperature of 1.5 °C, this filter can handle condensation-prone conditions without clogging. The cellulose media effectively traps moisture-borne particulates, protecting downstream equipment.
Space-Constrained Installations
The filter's compact dimensions (60 mm OD, 50 mm height) allow installation in tight machinery cabinets or alongside existing components. This simplifies retrofitting in older systems where space is limited.
Multi-Brand Fleet Maintenance
If your facility operates both Atlas Copco and Kaeser compressors, this filter can serve as a common replacement filter. This simplifies inventory management and reduces the need to stock multiple branded filters.
Check your current filter's outer diameter (60 mm), body height (50 mm), and thread size if applicable. This filter is a direct replacement for filters used in Atlas Copco and Kaeser equipment, but always verify physical dimensions against your existing unit.
This filter uses a cellulose media with a 3 µm filtration rating. It is designed for general particulate removal in compressed air systems, not for coalescing or high-efficiency particulate air (HEPA) applications.
The outer diameter is 60 mm and the body height is 50 mm. Thread type and size are not specified; you should measure the thread on your current filter or consult your equipment manual to ensure compatibility.
No, this is an aftermarket replacement filter built to the original dimensions and ratings. It is not manufactured by Atlas Copco or Kaeser, but it is designed to fit and function as a direct substitute for their original filters.
Installation is similar to the original filter: turn off the compressor, depressurize the system, unscrew the old filter, and screw on the new one by hand until snug. Do not use tools to overtighten. Check for leaks after restarting.
We offer worldwide shipping with tracking. Your purchase is backed by a 30-day money-back guarantee and a price-beat guarantee. If you find a lower price on an identical product, we will match it.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
We will also tell you when that part is due again. A couple of emails a month, and you can stop them from any one of them.
WELCOME10
Use it on your first order. Check your email and confirm the address so we can send you the reminders too.
