Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
Kobelco YN30V00111F1 Aftermarket Pilot Control Valve
Kobelco YN30V00111F1 Aftermarket Pilot Control Valve
Kobelco YN30V00111F1 Aftermarket Pilot Control Valve

Kobelco YN30V00111F1 Aftermarket Pilot Control Valve

$97.59 USD
  • SKU: SPM-HEP-5171-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 4.0 kg (8.82 lb)
Nitrile (NBR) O-Ring Assortment Kit, Metric, ...: $9.78 $9.30 with this part
Universal Filter Strap Wrench for Oil, Fuel a...: $9.59 $9.12 with this part
Members earn 97 points on this order. Join today to earn 200 points off your first order.

Kobelco YN30V00111F1 is the joystick pilot control valve: an aluminium body with four pilot ports and a centre port underneath, a four hole mounting flange, a rubber boot and the square lever stub on top. It is used on Kobelco SK75-8 to SK350-8 excavators. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Pilot Control Valve
Replaces Kobelco YN30V00111F1
Type Joystick pilot control valve (handle not included)
Ports Four pilot ports plus centre port
Machine Kobelco SK75-8, SK130-8, SK200-8, SK250-8, SK350-8
Fits Kobelco SK75-8, SK130-8, SK200-8, SK250-8 and SK350-8 excavators
Condition New, aftermarket
Stat. HS-Code 848180
Country of Manufacture China
Compatibility

Kobelco machines

Kobelco SK75-8, SK130-8, SK200-8, SK250-8 and SK350-8 excavators

Check the part number on your old unit before ordering.

Part numbers
Kobelco Part No.(SPM Part No.) Fits
YN30V00111F1(SPM-HEP-5171) Kobelco SK75-8, SK130-8, SK200-8, SK250-8 and SK350-8 excavators

Applications & use cases

Controls weak or dead
The pilot (self reducing) valve feeds the low pressure oil the joysticks and pedals use. When it fails every function becomes sluggish or stops responding together.

Low pilot pressure reading
A gauge on the pilot circuit reading well under the service figure, with a healthy pump, points to the reducing valve.

Travel or attachment pedal problems
A worn foot pilot valve gives jerky or one sided travel and attachment control.

Matching the old unit
Match the part number on the old valve and check the port layout before fitting.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay, aftermarket seller USD 154.67 2 Nov 2026
Fab Heavy Parts USD 161.13 2 Nov 2026
Buy Machinery Parts USD 163.49 2 Nov 2026
FridayParts USD 171.66 2 Nov 2026
YEM Parts USD 217.81 2 Nov 2026
MyMROmarts USD 231.92 2 Nov 2026
SINOCMP USD 259.00 2 Nov 2026
Spare Part Mart USD 97.59 Today

Our price of USD 97.59 is 37% to 62% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Kobelco SK75-8?

Yes, it was made for the Kobelco SK75-8, and 4 more listed under compatible equipment. Check the old pilot valve is marked YN30V00111F1 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the pilot valve on my Kobelco SK75-8?

On the Kobelco SK75-8, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.

What are the signs the pilot valve needs replacing?

A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.

Should I grease the connector?

A little dielectric grease keeps water out of the plug on machines that work outside. Make sure the terminals are clean and tight first.

How do I test the old part first?

Read the fault codes, then check the plug and wiring for corrosion or a broken wire. A wiring fault reads the same as a failed pilot valve.

Is this a genuine Kobelco YN30V00111F1?

No. It is an aftermarket pilot valve made to replace the Kobelco YN30V00111F1. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.

Related products

BACK TO TOP
Chat directly with MikeThe founder