No Products in the Cart
Nitrile (NBR) O-Ring Assortment Kit, Metric, ...: 
Universal Filter Strap Wrench for Oil, Fuel a...: Komatsu 723-40-91101 is the screw in main relief valve cartridge in bright steel, with a black hex lock nut and adjuster cap at one end, a threaded body with O ring and a cross drilled sleeve at the other end. It is used on Komatsu PC200-7 and PC200-8 excavators. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.
The same part is also sold as 723-40-91102.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
| Part Type | Main Relief Valve |
| Replaces | Komatsu 723-40-91102 |
| Machine | Komatsu PC200-7, PC210-7, PC200-8, PC210-8 |
| Position | Main relief, control valve |
| Type | Screw in cartridge |
| Cross references | 723-40-91101 |
| Fits | Komatsu PC200-7, PC210-7, PC200-8 and PC210-8 excavators |
| Condition | New, aftermarket |
| Stat. HS-Code | 848140 |
| Country of Manufacture | China |
Komatsu machines
Check the part number on your old unit before ordering.
| Komatsu Part No.(SPM Part No.) | Fits |
|---|---|
| 723-40-91102(SPM-HEP-5107) | Komatsu PC200-7, PC210-7, PC200-8 and PC210-8 excavators |
| 723-40-91101(SPM-HEP-5107) | Komatsu PC200-7, PC210-7, PC200-8 and PC210-8 excavators |
Slow or weak hydraulics
A main or port relief valve that opens early or will not seat dumps oil to tank: the boom, arm or swing slows and loses force. Check pump pressure at the test port first.
Overheating oil
A relief valve that leaks past its seat turns pump flow into heat, so the hydraulic oil runs hot during normal work.
Pressure that will not set
If adjusting the relief screw no longer changes the pressure, the spring, poppet or seat is worn and the cartridge needs replacing.
Matching the old valve
Match the full part number stamped on the old cartridge, and set the pressure to the machine's service figure after fitting.
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller | Price | Checked |
|---|---|---|
| eBay, aftermarket seller | USD 103.00 | 2 Nov 2026 |
| Fab Heavy Parts | USD 113.62 | 2 Nov 2026 |
| SINOCMP | USD 129.00 | 2 Nov 2026 |
| Kudu Parts | USD 130.00 | 2 Nov 2026 |
| Buy Machinery Parts | USD 135.45 | 2 Nov 2026 |
| FridayParts | USD 142.22 | 2 Nov 2026 |
| Spare Part Mart | USD 58.91 | Today |
Our price of USD 58.91 is 43% to 59% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Yes, it was made for the Komatsu PC200-7, and 3 more listed under compatible equipment. Check the old relief valve is marked 723-40-91101 or one of the cross references, because makers change parts between serial ranges.
On the Komatsu PC200-7, it depends on hours and working conditions. Follow the machine service schedule, and change it when it shows wear rather than waiting for it to fail.
Leaks, noise, loss of performance, or visible wear compared with a new part. If in doubt, measure it against the sizes in the specifications.
Match the part number on the old relief valve to Komatsu 723-40-91101 or a number in the cross reference table. If the number is worn off, compare the sizes in the specifications.
Yes. Every order is covered by our 30 day money back guarantee. Keep it unused and in its packaging.
No. It is an aftermarket relief valve made to replace the Komatsu 723-40-91101. It is not made by the original manufacturer; the number only shows what it replaces.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Join and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that. Turn points into a discount whenever you like.
Opens the Marty Mates panel. No password: you enter your email, we send a code, and that is you in with your 200 points waiting. Joining signs you up to our emails and you can leave any time from the link in any of them. See our terms and conditions.
Member deals, specials before they go public, and easy ways to stack up points. Plus a nudge when a part you bought is due, so you are not caught out mid job.
You can leave any time from the link in any email we send. See our terms and conditions.
We will only bother you when it is worth it: a member deal, a specials drop, a way to earn points faster, or a heads up that a part you bought is due.
Join Marty Mates and we put 200 points on your account, worth $10 off an order over $75 USD. Then a point for every dollar you spend after that.
No password: you enter your email, we send a code, and that is you in.
