No Products in the Cart
| Differential Pressure | 20 mbar |
| Filtration Media | Borosilicate micro glass fibre 1 µm 3 |
| Media type | Borosilicate micro glass fibre |
| Filtration Rating | 1 µm |
| Body Height | 450 mm (17 11/16") |
| Height-1 | 7 mm (9/32") |
| Total Height | 457 mm (18") |
| Maximum Working Temperature | 65°C (149°F) |
| Minimum Working temperature | 1.5°C (35°F) |
| Product Net Weight | 0.35 kg (0.77 lbs) |
| Smallest Inner Diameter | 48 mm (1 7/8") |
| Outer Diameter | 68 mm (2 11/16") |
| Stat. HS-Code | 84149000 |
| Country of Manufacture | China |
| Brand | Code |
|---|---|
| Atlas Copco | 2255290911 |
| Atlas Copco | 2255291306 |
| Hankison | E7-36 |
| HiFi Filter | SI 46366 |
| Kaeser | 9.4842.0 |
| Kaeser | E-D-107 |
| Mann-Filter / Mann & Hummel | LD 7006 |
| Noitech | NM 000229 |
| Omega Air | 1010100105232 |
| Omega Air | 1010100108532 |
| Omega Air | OHK 36 E7/R |
| Omega Air | OHK 36 E7/XR |
| Oxfil | IF.9974 |
| Sotras | SM 9974 |
| Spare Part Mart | SPM-INF-1107 |
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Dusty Industrial Environments
In workshops or factories with high airborne dust levels, the 1 µm borosilicate media captures fine particulates, protecting downstream equipment from contamination and reducing maintenance frequency.
Continuous-Duty Compressor Systems
For compressors running 24/7, the low differential pressure of 20 mbar minimizes energy loss while maintaining consistent filtration efficiency, helping to lower operating costs over time.
Inventory Consolidation for Multi-Brand Fleets
If your facility uses both Atlas Copco and Kaeser compressors, this single filter model can serve both, simplifying stock management and reducing the need for multiple part numbers.
Cold Climate Installations
With a minimum working temperature of 1.5 °C, this filter is suitable for unheated compressor rooms in colder climates, ensuring reliable filtration even near freezing conditions.
Check your compressor's filter housing dimensions: outer diameter 68 mm, smallest inner diameter 48 mm, and total height 457 mm. Also verify the thread type (not specified here) and compare with the original filter's part number against our cross-reference list.
The filter uses borosilicate micro glass fibre media with a filtration rating of 1 µm. This rating is suitable for removing fine particulates and oil aerosols from compressed air.
Key dimensions: outer diameter 68 mm, smallest inner diameter 48 mm, body height 450 mm, and total height 457 mm. Ensure your housing accommodates these sizes and that the sealing surfaces match.
This is an aftermarket replacement, not OEM. It is built to the original dimensions and ratings and is a direct replacement for filters from brands like Atlas Copco and Kaeser. It offers a cost-effective alternative without sacrificing performance.
Installation is straightforward: remove the old filter, clean the housing, and insert the new one. Replacement intervals depend on operating conditions, but typically every 6-12 months or when differential pressure exceeds 20 mbar.
We offer worldwide shipping with tracking. Your purchase is backed by a 30-day money-back guarantee and a price-beat guarantee, ensuring you get the best value.
Prices depend on your ZIP or postcode.
Live rates for the quantity selected, delivered to your door. Confirmed at checkout.
Drop your email below and the code is yours.
We will also tell you when that part is due again. A couple of emails a month, and you can stop them from any one of them.
WELCOME10
Use it on your first order. Check your email and confirm the address so we can send you the reminders too.
