Sofima (UFI) ESE21NFA, direct aftermarket replacement. Sofima (UFI) CCA301EFT1 is an oil filter, 177 mm (6.97 in) high, rated 5 µm. The same element is listed under 23 other numbers from Bomford, Domange, Epe, Fai Filtri, Finn Filter and others, all in the cross reference table below.
The oil filter takes wear particles and dirt out of the oil before it goes back to the bearings and the compression stage. Every element is checked against the part number before it ships, and every order is covered by our
30 day money back guarantee, worldwide delivery and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Oil Filter |
| Replaces |
Sofima (UFI) CCA301EFT1 |
| Outer Diameter |
127 mm (5.00 in) |
| Height |
177 mm (6.97 in) |
| Filtration Rating |
5 µm |
| Media |
Pleated filter media |
| Stat. HS-Code |
842123 |
| Country of Manufacture |
China |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| SONA Filtration |
USD 43.95 |
18 Oct 2026 |
| Oxfil |
USD 53.80 |
18 Oct 2026 |
| FilterFinder Online |
USD 66.00 |
18 Oct 2026 |
| Hydrafil |
USD 167.95 |
18 Oct 2026 |
| Spare Part Mart |
USD 35.16 |
Today |
Our price of USD 35.16 is 20% to 79% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Scheduled service
Change the oil filter at every oil change, or at the hours in the service plan, whichever comes first.
Breakdown spares
Keep one on the shelf so a loaded oil filter does not stop the machine while parts are ordered.
Workshop and fleet stock
Workshops looking after several machines can stock this one element under any of its 24 part numbers.
Frequently asked questions
Is this a genuine Sofima (UFI) CCA301EFT1?
No. It is an aftermarket oil filter made to replace the Sofima (UFI) CCA301EFT1. It is not made by or affiliated with Sofima (UFI), and the part number is used only to show what it replaces.
Will it fit my machine?
It replaces the element numbered Sofima (UFI) CCA301EFT1 and the other numbers in the cross reference table. Check the number on the old element or in the machine's parts list, or measure it: this one is 177 mm (6.97 in) high.
When should I change the filter?
Change the oil filter at every oil change, or at the hours in the service plan, whichever comes first.
How do I fit it?
Stop the machine and let the pressure out. Unscrew the old filter, wipe the seat, smear a little clean oil on the new filter's seal, then screw it on by hand until the seal touches and a further three quarters of a turn. Run the machine and check for leaks.