SPM-HEP-4701 is the screw in solenoid cartridge valve with its coil, a long twin lead and a black two pin plug. It is used on Komatsu PC60-7 and PC120-6 excavators. This aftermarket valve has the same ports, mounting and coil connector as the original, so it fits where the old one came off.
It replaces Komatsu 203-60-62161 and Komatsu 203-60-56560.
Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.
Technical properties & sizes
Specifications
| Part Type |
Swing Solenoid Valve |
| Replaces |
Komatsu 203-60-62161 |
| Machine |
Komatsu PC60-6, PC60-7, PC100-6, PC120-6, PC128US-1 |
| Cross references |
Komatsu 203-60-56560 |
| Fits |
Komatsu PC60-6, PC60-7, PC100-6, PC120-6 and PC128US-1 excavators |
| Condition |
New, aftermarket |
| Stat. HS-Code |
848180 |
| Country of Manufacture |
China |
Compatibility
Komatsu machines
Komatsu PC60-6, PC60-7, PC100-6, PC120-6 and PC128US-1 excavators
Check the part number on your old unit before ordering.
Part numbers
| Komatsu Part No.(SPM Part No.)
|
Fits |
|
203-60-62161(SPM-HEP-4701)
|
Komatsu PC60-6, PC60-7, PC100-6, PC120-6 and PC128US-1 excavators |
Cross references
| Brand |
Part No. |
| Komatsu |
203-60-62161
|
| Komatsu |
203-60-56560 |
All of these numbers are the same part.
Applications & use cases
Function will not work
If a hydraulic function is dead but the pump and controls work, the solenoid valve or its coil is the usual suspect.
Drift or creep
A valve that does not seal lets cylinders creep. A new valve restores holding.
Burned coil
A coil that reads open or short on a meter needs replacing; check the connector for water first.
Fleet spares
Keep the common valves for your machines in stock to cut downtime.
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| SINOCMP |
USD 69.00 |
31 Oct 2026 |
| Spare Part Mart |
USD 30.05 |
Today |
Our price of USD 30.05 is approximately 56% less than this seller.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Frequently asked questions
Will it fit my Komatsu PC60-6?
Yes, it was made for the Komatsu PC60-6, and 4 more listed under compatible equipment. Check the old solenoid valve is marked 203-60-62161 or one of the cross references, because makers change parts between serial ranges.
How often should I replace the solenoid valve on my Komatsu PC60-6?
On the Komatsu PC60-6, there is no fixed interval. It is changed when it fails, and many fail from water in the plug or chafed wiring rather than wear.
What are the signs the solenoid valve needs replacing?
A fault code for this circuit, readings that jump or stay fixed, or a part that does not respond with power at the plug.
How do I test the old part first?
Read the fault codes, then check the plug and wiring for corrosion or a broken wire. A wiring fault reads the same as a failed solenoid valve.
How do I test a solenoid coil?
Measure the coil resistance with a multimeter and check for supply voltage at the plug with the circuit on. An open coil reads infinite.
Is this a genuine Komatsu 203-60-62161?
No. It is an aftermarket solenoid valve made to replace the Komatsu 203-60-62161. It is not made by the original manufacturer; the number only shows what it replaces.