Direct from Specialist Manufacturers | 43,000+ Products Available | 30 day money back guarantee
SPM-HEP-5200 Main Relief Valve
SPM-HEP-5200 Main Relief Valve
SPM-HEP-5200 Main Relief Valve

SPM-HEP-5200 Main Relief Valve

$55.99 USD
  • SKU: SPM-HEP-5200-P1
  • Availability: in stock Many in stock Out of stock In-stock at manufacturer. Please add 5-10 days to shipping time
  • Weight: 2.0 kg (4.41 lb)
Nitrile (NBR) O-Ring Assortment Kit, Metric, ...: $9.78 $9.30 with this part
Universal Filter Strap Wrench for Oil, Fuel a...: $9.59 $9.12 with this part
Members earn 55 points on this order. Join today to earn 200 points off your first order.

SPM-HEP-5200 is the main relief valve cartridge for the control valve: a long steel body with the radial ports on the poppet end, the thread and O-ring, and the hex adjuster and lock nuts. It is used on Hitachi EX200-5 and EX220-5 excavators. This aftermarket version is made to the same mounting and connections as the original, so it fits where the old one came off.

It replaces Hitachi 4386637 and Hitachi 4381811.

Sold as one unit. Check the number on your old part, or in the parts manual for your machine, before ordering.

Technical properties & sizes

Specifications
Part Type Main Relief Valve
Replaces Hitachi 4386637
Type Main relief valve cartridge
Machine Hitachi EX200-5, EX220-5
Cross references Hitachi 4381811
Fits Hitachi EX200-5 and EX220-5 excavators
Condition New, aftermarket
Stat. HS-Code 848140
Country of Manufacture China
Compatibility

Hitachi machines

Hitachi EX200-5 and EX220-5 excavators

Check the part number on your old unit before ordering.

Part numbers
Hitachi Part No.(SPM Part No.) Fits
4386637(SPM-HEP-5200) Hitachi EX200-5 and EX220-5 excavators
4381811(SPM-HEP-5200) Hitachi EX200-5 and EX220-5 excavators

Applications & use cases

Slow or weak hydraulics
A main or port relief valve that opens early or will not seat dumps oil to tank: the boom, arm or swing slows and loses force. Check pump pressure at the test port first.

Overheating oil
A relief valve that leaks past its seat turns pump flow into heat, so the hydraulic oil runs hot during normal work.

Pressure that will not set
If adjusting the relief screw no longer changes the pressure, the spring, poppet or seat is worn and the cartridge needs replacing.

Matching the old valve
Match the full part number stamped on the old cartridge, and set the pressure to the machine's service figure after fitting.

Price beat guarantee

We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:

Seller Price Checked
eBay (4 aftermarket sellers) USD 69.99 to 79.90 3 Nov 2026
SINOCMP USD 139.00 3 Nov 2026
Spare Part Mart USD 55.99 Today

Our price of USD 55.99 is 20% to 60% less than these sellers.

Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.

Frequently asked questions

Will it fit my Hitachi EX200-5?

Yes, it was made for the Hitachi EX200-5, and 1 more listed under compatible equipment. Check the old relief valve is marked 4386637 or one of the cross references, because makers change parts between serial ranges.

How often should I replace the relief valve on my Hitachi EX200-5?

On the Hitachi EX200-5, it depends on hours and working conditions. Follow the machine service schedule, and change it when it shows wear rather than waiting for it to fail.

What are the signs the relief valve needs replacing?

Leaks, noise, loss of performance, or visible wear compared with a new part. If in doubt, measure it against the sizes in the specifications.

How do I check it is the right part?

Match the part number on the old relief valve to Hitachi 4386637 or a number in the cross reference table. If the number is worn off, compare the sizes in the specifications.

Should I keep the old part?

Keep it until the new one is fitted and running. It is the quickest way to compare sizes, connectors and mounting if anything looks different.

Is this a genuine Hitachi 4386637?

No. It is an aftermarket relief valve made to replace the Hitachi 4386637. It is not made by the original manufacturer; the number only shows what it replaces.

Images and data are used as a guide and are deemed reliable to Spare Part Mart. Product may appear differently (e.g. colour) but will be as per the specs above. All cross references are deemed reliable to our knowledge. We encourage you to double check before ordering.
BACK TO TOP
Chat directly with MikeThe founder