Wilkerson MSP-95-876, direct aftermarket replacement. Aftermarket replacement element for the Wilkerson MSP-95-876, the 0.5 micron general purpose coalescing element for Wilkerson compressed air line filters. It also replaces HiFi SI 49011.
This is the general purpose coalescing element that removes water and oil droplets and particles down to 0.5 micron. It is usually fitted ahead of a 0.01 micron element so the finer element lasts longer. Every element is checked against the part number before it ships, and every order is covered by our
30 day money back guarantee, worldwide delivery and
price beat guarantee.
Technical properties & cross references
Specifications
| Part Type |
Compressed air filter element |
| Replaces |
Wilkerson MSP-95-876 |
| Also Replaces |
HiFi SI 49011 |
| Grade |
General purpose type "B" coalescing, 0.5 micron |
| Flow Direction |
Inside to outside |
| Media |
Borosilicate glass fibre coalescing |
| Country of Manufacture |
China |
| Stat. HS-Code |
842139 |
Price beat guarantee
We check what other aftermarket sellers charge for this same part. Their prices on the date we checked:
| Seller |
Price |
Checked |
| Compressor Now |
USD 271.67 |
22 Oct 2026 |
| The Air Market |
USD 284.22 |
22 Oct 2026 |
| Moisture Boss |
USD 290.14 |
22 Oct 2026 |
| eIndustrial Solutions |
USD 401.00 |
22 Oct 2026 |
| Air Compressor Services |
USD 549.00 |
22 Oct 2026 |
| Spare Part Mart |
USD 217.34 |
Today |
Our price of USD 217.34 is 20% to 60% less than these sellers.
Found this part cheaper somewhere else? Send us the listing and we will beat it by 5% under our Price Beat Guarantee. Every order is also covered by our 30 day money back guarantee.
Use cases & applications
Scheduled element change
Change particulate and coalescing elements at least once a year, or sooner when the pressure drop across the filter reaches about 0.7 bar (10 psi). Change activated carbon elements at least every 6 months, or when oil odour returns downstream.
Pre-filter for a 0.01 micron stage
A general purpose coalescing element takes out the bulk of the water, oil and dirt, so the 0.01 micron element after it lasts longer.
Workshop and plant air
Line filters sit after the compressor, receiver or dryer to keep water, oil and dirt out of the air system.
Frequently asked questions
Is this a genuine Wilkerson MSP-95-876?
No. It is an aftermarket compressed air filter element made to replace the Wilkerson MSP-95-876. It is not made by or affiliated with Wilkerson or Dixon, and the part number is used only to show what it replaces.
Will it fit my filter?
It replaces the element marked MSP-95-876. Check the number printed on the old element or on the filter body label before ordering.
When should I change the element?
Change particulate and coalescing elements at least once a year, or sooner when the pressure drop across the filter reaches about 0.7 bar (10 psi). Change activated carbon elements at least every 6 months, or when oil odour returns downstream.
Which element do I need?
Use the same part number as the element you are taking out. A typical line runs a general purpose coalescing or particulate filter, then a 0.01 micron coalescing filter, then an activated carbon adsorber where oil vapour and odour must be removed.
Should I change anything else at the same time?
Fit a new bowl O-ring if the old one is flattened or cracked, check that the bowl drain works, and change the other elements in the same line at the same service.